Maya Ellison
ST1300 owners have reported using paint to refurbish their vehicles, including the plastic components. Some have used paint to refurbish faded plastic, while others have used it to cover up scratches or damage caused by accidents or attempts at theft. Owners have also reported using paint to refresh the colour of their vehicles' plastic trim, which can become grey or discoloured over time.
ST1300 Plastic Pieces Painting Characteristics and Values Table
| Characteristics | Values |
|---|---|
| Paint for plastic pieces | Krylon Fusion for plastic (gloss) |
| Number of coats | 5-6 |
| Time between coats | 15 minutes |
| Paint for black plastic trim | Halfords Plastic Bumper Paint Black |
| Paint for black plastic surrounding pocket | Color Rite |
| Paint for rims of ST1300A | Iron Nail Silver Metallic |
| Paint for 2004 rims | NH168M (Axis Gray Metallic) |
| Paint for 2005 ST1300 | Candy Graceful Red |
| Paint for 2006 ST1300 | Digital Silver Metallic |
| Paint for 2007 ST1300 | Graphite Black |
| Paint for 2008 ST1300 | Candy Glory Red |
| Paint for 2009 ST1300 | Graphite Black |
| Paint for 2010 ST1300 | Graphite Black |
Explore related products
What You'll Learn
Painting ST1300 black plastic trim
Painting the black plastic trim of your ST1300 can be a great way to refresh its look and improve its overall appearance. Here's a comprehensive guide to help you achieve a professional finish:
Preparation:
Before starting the painting process, it's essential to clean the plastic trim thoroughly. Use a mild detergent and water solution to remove any dirt, grease, or road grime. Ensure that the surface is completely dry before moving on to the next step. Additionally, it's recommended to sand the plastic trim lightly with fine-grit sandpaper to create a rough surface for the paint to adhere better.
Choosing the Right Paint:
Selecting the appropriate paint is crucial for achieving a durable and aesthetically pleasing finish. There are a few options available:
- Plastic-specific paints: These paints are designed specifically for use on plastic surfaces and often provide a long-lasting finish. The Halfords Plastic Bumper Paint Black is a popular option that can be found at Halfords UK.
- Touch-up paints: If you're looking to cover scratches or small damaged areas, touch-up paints can be a great option. Color Rite offers a range of touch-up paints specifically for Honda motorcycles, including the ST1300. You can find the paint code under the seat of your ST1300 to ensure an exact match.
- Heat gun treatment: If your black trim has faded but is not too damaged, you can use a heat gun to restore its original colour. This method is simple and effective, but be cautious not to overdo it, as it can damage the surface if applied for too long.
Painting Process:
When painting the plastic trim, it's recommended to use light, even coats to achieve a smooth and consistent finish. Multiple light coats are better than a few heavy coats, as it reduces the risk of dripping and provides a more durable result. Always follow the instructions on the paint can, and allow adequate drying time between coats.
Protection and Maintenance:
To protect your freshly painted trim, consider applying a clear coat or sealant specifically designed for plastic surfaces. This will add an extra layer of protection against scratches, chips, and fading. Additionally, regular cleaning and maintenance of your ST1300's plastic trim will help prolong its lifespan and keep it looking its best.
Remember, taking your time and following the proper steps will ensure that your ST1300's black plastic trim looks great and stands the test of time.
How Paint and Epoxy Removers Affect Plastics
You may want to see also
Explore related products
ST1300 paint codes
The Honda ST1300 is a vehicle with plastic components that can be painted. Some ST1300 owners have reported issues with the paint on their vehicles, such as scratches and fading. To address these issues, owners can use touch-up paint to restore the vehicle's original colour.
When it comes to ST1300 paint codes, there are a variety of colours available, each with its own unique code. For example, the paint code for the rims of a 2006 ST1300A is NH167MU, which corresponds to Iron Nail Silver Metallic. Another paint code is NH168M (Axis Gray Metallic), which can be used for the wheels of a 2005 ST1300.
Additionally, there are specific paint codes for different colours of the ST1300. Candy Glory Red Tricoat, for instance, has the paint code HON001, while Candy Graceful Maroon Tricoat is HON043, and Graphite Black is HON006. These paint codes are essential for ordering touch-up paint to match the exact colour of your ST1300.
It is worth noting that some ST1300 owners have mentioned issues with the handlebars developing rust, which may require painting. In such cases, it is recommended to deal with the rust first before applying any touch-up paint. Additionally, a clear coat may be required after painting to protect the surface and ensure a durable finish.
Overall, while the ST1300 plastic pieces can be painted, it is important to use the correct paint codes and follow the necessary steps to ensure a successful and long-lasting paint job.
Removing Paint Marker from Plastic: Effective Strategies
You may want to see also
Explore related products
ST1300 side pannier disassembly and painting
The ST1300 side pannier can be disassembled and painted to restore its appearance. This process involves taking apart the pannier, preparing the surface, applying paint, and reassembling the components. Here is a step-by-step guide to achieving a professional-looking result:
Disassembly:
Start by familiarizing yourself with the pannier's locking mechanism. The lock barrel may need to be disassembled to access the inner workings. Refer to online resources, such as YouTube videos, for detailed instructions on disassembling the lock. Take your time and be cautious when handling the lock components.
Surface Preparation:
Before painting, ensure the surfaces are clean and free from grime. Consider using a heat gun to restore the plastic's appearance, but exercise caution to avoid damaging the surface. Alternatively, use a plastic repair kit to address any nicks, scratches, or exposed metal pieces. Sand or snip off any sharp edges to create a smooth base for painting.
Painting:
Choose a suitable paint designed specifically for plastic surfaces. For example, Halfords Plastic Bumper Paint Black is an option available in the UK. Apply multiple thin coats, allowing adequate drying time between each coat. Use painter's tape to achieve sharp paint lines and protect adjacent areas. Aim for 5-6 coats, waiting about 15 minutes between each coat in the hot sun.
Reassembly:
Refer to pictures or notes taken during the disassembly process. Pay close attention to the placement of springs, ball bearings, and the spring holding the handle in place. Use needle-nose pliers for precise positioning of the ball bearings. Grease key areas that were likely greased by the manufacturer to ensure smooth operation.
Finishing Touches:
Once the paint is dry, inspect your work. Ensure that all components are securely in place and functioning properly. Enjoy your refreshed ST1300 side pannier, knowing that you've given it a new lease of life!
Transforming Plastic Pots with Paint: A Creative Guide
You may want to see also
Explore related products
ST1300 handlebar painting
Painting your ST1300 handlebars can be a great way to refresh the look of your bike, cover up scratches, or deal with rust on replacement parts. While painting the handlebars is a less common modification, it is certainly possible and can be a fun project. Here is a guide to help you through the process of painting your ST1300 handlebars:
Preparation:
Before starting the painting process, it is important to prepare your workspace and gather the necessary materials. Make sure you have a well-ventilated area to work in, as paint fumes can be hazardous. Cover any nearby surfaces to protect them from paint splatters. You will need:
- Sandpaper or a sandblasting tool
- Primer
- Paint (either spray paint or paintbrushes and paint trays) in your chosen colour
- Clear coat sealant
- Gloves and a respirator for safety
Step 1:
If your handlebars are already installed, you will need to remove them from your ST1300. This will give you a better angle to work with and protect the rest of your bike from accidental paint splatters. Once removed, lay them on a flat surface, covering that surface with a drop sheet or newspaper in case of messes.
Step 2:
Prepare the surface of your handlebars for painting. If they are already painted, use sandpaper or a sandblaster to remove the existing paint and create a rough surface for the new paint to adhere to. If your handlebars are unpainted, you can skip this step, but make sure they are clean and free of any oils or dirt.
Step 3:
Once your handlebars are prepared, it is time to prime. Apply a thin, even coat of primer to the handlebars, following the instructions on your chosen product. Allow the primer to dry completely according to the manufacturer's instructions.
Step 4:
Now it is time to paint! If using spray paint, hold the can about 6-8 inches away from the surface of the handlebars and spray in steady, even strokes. Be sure to get into all the nooks and crannies. If using a paintbrush, carefully apply the paint to the handlebars, working in the direction of the metal. Allow the first coat to dry, then apply a second coat if needed.
Step 5:
After your paint has dried, it is time to seal it in. Apply a clear coat sealant over the paint, following the manufacturer's instructions. This will protect your paint job from chips and scratches and give it a nice shine.
Step 6:
Finally, reinstall your handlebars on your ST1300, following the reverse of the removal process. Enjoy your refreshed bike!
Colour Matching:
If you are looking to colour match your paint job to the original ST1300 colours, you can find the paint codes under the seat of your bike. These codes can be taken to a paint dealer to have the correct colour mixed. Some common ST1300 paint codes include:
- NH295M (Sparkling Silver Metallic) for 2006 models
- R151CU, Candy Graceful Red for 2005 models
- NH167MU, Iron Nail Silver Metallic for wheels
- NHB01, Graphite Black for 2009 and 2010 models
Painting Plastic Auto Parts: A Step-by-Step Guide
You may want to see also
Explore related products
ST1300 year colours
The ST1300 is a Honda motorcycle model that debuted in 2002 in the European market and the following year in the United States. It replaced the ST1100 model, also known as the Pan European, and was designed for long-distance cruising. The ST1300 featured a larger engine with more power, an all-new frame, a two-element fuel tank, and a cassette-type transmission.
Over the years, the ST1300 has been offered in various colours, with some models featuring annual colour changes. Here is a list of known colour options for specific model years:
- 2004: The paint code for this year's model is unavailable, but it appears to be a darker red, known as Candy Graceful Red.
- 2005: Candy Graceful Red, which is a slightly darker shade compared to the later Candy Glory Red.
- 2009: Candy Glory Red, which is a brighter red shade than the 2004/2005 model years.
- 2009 Canada: Graphite Black.
- 2010: Graphite Black.
It is worth noting that some owners have reported issues with paint fading, particularly on black plastic trim pieces. Owners have experimented with various methods to restore the colour, including using a heat gun or plastic paint. Additionally, some aftermarket parts, such as HeliBars, have been reported to develop rust, prompting owners to consider painting them.
Painting Plastic Pipes: A Step-by-Step Guide to Success
You may want to see also
Frequently asked questions
First, remove the 4 nuts holding the side panel with paint. Then, remove the metal bracket and rubber washer underneath it. Next, locate and remove the screws and nuts holding the locking mech in place, including the 3 long screws at the top and 4 shorter ones towards the middle and bottom. Once all the screws, nuts, and brackets are removed, you can start removing the entire top piece.
You can use the Krylon Fusion for plastic (gloss), which is recommended by some ST1300 owners and has yielded great results.
It is recommended to apply 5-6 coats of paint, waiting about 15 minutes between each coat in the hot sun.
You can use a satin finish black paint to clean the ST1300 plastic surfaces.
The paint codes for the ST1300 vary by year and region. For example, the 2010 paint code is NHBO1 (Graphite Black), while the 2009 US paint code is R101CU (Candy Glory Red).
