Alexei Volkov
Plastic dinosaurs can be used in a variety of ways to attach them to drawers. They can be used as handles or knobs, with holes drilled into them and attached with screws or zip ties. They can also be cut in half and glued to the sides of drawers as pull handles. Alternatively, they can be used to decorate the drawers by gluing them onto the surface and painting over them. Plastic dinosaurs can also be used as bookends, jewellery holders, or chess pieces.
| Characteristics | Values |
|---|---|
| Materials | Plastic dinosaurs, knife or icepick, plastic molly or any expanding anchor for hollow surfaces, screwdriver, zip ties, glue, spray paint, drill, bolts |
| Methods | Make a small hole in the dinosaur, insert the molly into the hole, attach the dinosaur to the drawer from the inside using a screwdriver; make 2 slits in the dinosaur, guide a zip tie through the drawer and into the dinosaur, out of the dinosaur and back through the drawer, tighten the zip tie |
| Additional Tips | Layout the dinosaurs and line them up before determining which will be the backside of the knob, make a mark where you plan to drill the hole, measure twice, slowly drill into the piece, spray paint the pieces, add glue to the end of the bolt and thread it into the piece, let the knob dry before attaching it to the drawer |
Explore related products
What You'll Learn
Using zip ties
- Layout the plastic dinosaurs and line them up as you want them to appear on the drawer.
- Determine which side will be the backside of the knob and mark where you plan to drill the hole.
- Make a notch drill mark to help the drill stay on track.
- Carefully drill a small hole in the body of the dinosaur. Ensure the hole is not too big, or the zip tie will not fit snugly.
- Feed the zip tie through the hole in the dinosaur.
- Attach the dinosaur to the drawer by threading the zip tie through the drawer from the inside.
- Tighten the zip tie securely.
- Trim the excess zip tie if needed.
You can also use zip ties in combination with other methods. For example, you can drill holes in the drawer and insert Plastic Molly or expanding anchors for hollow surfaces. Then, feed the zip tie through the dinosaur and the anchor to secure it in place. This method provides a sturdier attachment and ensures that the dinosaur lies flat against the drawer.
Debra Messing's Plastic Surgery: Did She or Didn't She?
You may want to see also
Explore related products
Drilling holes
- Prepare the necessary tools and materials: Ensure you have the required tools and materials before starting the project. This includes items such as a hand drill, drill bits of varying sizes, safety goggles, a ruler or tape measure, a pencil or marker, and any other specific hardware you plan to use, such as knobs or pulls.
- Layout and marking: Layout the plastic dinosaurs and decide how you want them positioned on the drawers. Mark the spots where you plan to drill the holes. It is crucial to measure twice to ensure accuracy. You can also create a notch drill mark to help guide the drill and keep it on track.
- Creating a starter hole: Put on your safety goggles for protection. Begin by using a smaller drill bit to create a "starter hole." This step is important as it prevents larger drill bits from jumping over the marked positions, causing splintering or uneven holes.
- Drilling the final hole: After the starter hole is created, switch to a larger drill bit that matches the size of your screw. Slowly and carefully drill through the marked spot. Take your time and maintain a steady grip to ensure accuracy and avoid any damage to the material.
- Attaching the dinosaurs: Once the holes are drilled, you can attach the plastic dinosaurs. Apply a generous amount of glue to the end of the bolt and begin threading it into the drilled hole. Allow the glue to dry completely before testing the stability of the attachment.
- Finishing touches: After the glue has dried, you can make any final adjustments and add your desired finishing touches. This may include painting the dinosaurs or adding any additional decorative elements to enhance the overall appearance.
By following these steps and taking your time, you can successfully attach plastic dinosaurs to your drawers using the drilling method. Remember to work carefully and accurately to ensure the best results.
Plastic Pollution: Fish at Risk
You may want to see also
Explore related products
Using glue
Prepare the Dinosaurs and Drawers:
Start by laying out the plastic dinosaurs and lining them up as you want them to appear on the drawers. This will help you visualize the final result and decide on the placement of each dinosaur. Determine which part of the dinosaur will be the backside of the knob and mark it. You can also mark the spots on the drawers where you plan to attach the dinosaurs.
Drilling and Gluing:
If your plastic dinosaurs don't already have holes, you will need to drill them. Make a notch drill mark first, both on the drawer and the plastic dinosaur, to help guide the drill. With a drill bit, slowly drill into the marked spots. Take your time with this step to avoid any mistakes. Once you have the holes, add a generous amount of glue to the end of a bolt and thread it into the dinosaur. Let the glue dry completely before attaching the dinosaur to the drawer.
Using Zip Ties (Optional):
If you want to use zip ties in addition to glue for extra security, you can. Make two slits in the dinosaur's body and guide the zip tie through the drawer and into the dinosaur. Bring the zip tie out of the dinosaur and back through the drawer, then tighten it down. Make sure to start from the inside of the drawer to avoid any issues with the square end of the zip tie.
Additional Tips:
Before attaching the dinosaurs, you can spray paint them to match your drawer's colour scheme or add a creative touch. You can also use hot glue to attach the dinosaurs directly to the drawers if you don't want to use bolts or zip ties. However, keep in mind that hot glue might not provide the same level of security as the other methods. Always let the glue dry completely before handling the drawers to ensure a strong bond.
Screen Protectors: Crack Prevention or Just a Myth?
You may want to see also
Explore related products
Making slits
Firstly, make two slits in the body of your chosen dinosaur. These slits should be small and precise, and you may find it helpful to mark the spots with a pen or pencil beforehand. A sharp knife or blade can be used for this step, but be cautious and take safety precautions to avoid any injuries.
The next step involves a zip tie. Starting from the backside of the drawer, guide the zip tie through the drawer and into one of the slits in the dinosaur. Then, bring the zip tie out through the other slit and back into the drawer. This creates a loop that secures the dinosaur to the drawer.
Now, all you need to do is tighten the zip tie. Make sure it is nice and snug so that the dinosaur stays firmly in place. And that's it! Your dinosaur is now attached to the drawer using the slit method.
You can also use an alternative method that involves making a small hole in the body of the dinosaur using a knife or ice pick. The hole should be just big enough for a plastic molly or any expanding anchor for hollow surfaces to fit snugly. Insert the molly into the hole and use a screwdriver to attach the dinosaur to the drawer from the inside. This method provides a secure attachment, but it is important to ensure the hole is not too big, or the molly may not fit properly.
BPA Exposure: Leaching Toxins from Plastic
You may want to see also
Explore related products
Plastic molly
Plastic mollies, also known as expanding anchors, are a great way to attach plastic dinosaurs to drawers. This method is ideal for hollow surfaces, such as the plastic dinosaurs you want to use as drawer pulls.
- Using a knife or ice pick, make a small hole in the body of the plastic dinosaur. Ensure that the hole is not too big, or the molly will not fit snugly.
- Insert the Plastic Molly into the hole.
- From the inside of the drawer, use a screwdriver to attach the dinosaur to the drawer through the Plastic Molly.
- You can also use zip ties as an alternative method. Make two slits in the dinosaur's body and guide the zip tie through the drawer and into the dinosaur. Then, bring the zip tie out and back through the drawer. Tighten the zip tie to secure the dinosaur in place.
It is important to note that the curved body of the dinosaur might pose a challenge in attaching it flat against the drawer. The zip tie method is a good solution to this problem.
Additionally, if you are drilling holes in the dresser or drawer, be sure to measure twice to ensure accuracy. You can also make a notch drill mark to help guide the drill and keep it on track.
The Art of Fake Flowers: Real or Plastic-Dipped?
You may want to see also
Frequently asked questions
The simplest way is to use plastic molly or any expanding anchor for hollow surfaces. Make a small hole in the body of the dinosaur using a knife or ice pick. Insert the molly into the hole and use a screwdriver to attach the dinosaur to the drawer from the inside.
Another method is to use a zip tie. Make two slits in the dinosaur's body. Starting on the backside of the drawer, guide the zip tie through the drawer and into the dinosaur, out the dinosaur and back through the drawer. Tighten the zip tie.
The hardest part of this method is fishing the zip tie through the dinosaur. Remember to start inside the drawer or you may not be able to get the square end of the zip tie through the hole.
You can try making a notch drill mark first to help the drill stay on track. Slowly drill into the piece. After drilling the hole, spray paint your pieces.
