Gravel For 8X6 Shed Base: How Much Is Needed?

If you're looking to build a base for an 8x6 plastic shed, you'll need to consider the type of gravel you use, the depth of the gravel, and the size of the shed base. It is recommended that shed foundations should extend 12″ on each side of the shed, so for an 8x6 shed, you'd need a 10x8 foundation. You'll also want to make sure the gravel is at least 4″ deep at all points of the shed. The type of gravel is important, too—'3/4″ clean' stone is recommended, and it's best to avoid 'pebble’ shaped gravel. The amount of gravel you'll need will depend on the depth and size of your shed base, but for reference, an average 10-by-16-foot shed base requires around 200 to 288 square feet of gravel.

The amount of gravel needed for a shed base depends on the depth of the gravel

The gravel should be compacted in layers, and it is recommended to use 'angular' shaped gravel rather than 'pebble' shaped gravel. The cost of gravel is about $1.25 to $1.80 per square foot, or around $200 to $288 for an average 10-by-16-foot shed base.

You will also need to plan for the cost of tools and materials, as well as labour if you hire someone to complete the project for you.

Pea gravel is recommended for shed bases

For example, if you want to use 15kg of 10m pea gravel per square, you will need 20 squares. This is because each square is 500 x 500 x 40mm, so you will need 20 squares to cover an area of 8x6 feet.

If you are using a different type of gravel, you can calculate the volume of the shed base and then multiply that by the density of the gravel to get the weight. For example, if your shed base is 9m2 x 0.1m = 0.9 m3, and the density of the gravel is 0.9 Kg/l, then you will need 810 Kg of gravel.

Gravel costs about $1.25 to $1.80 per square foot, or around $200 to $288 for an average 10-by-16-foot shed base. You will also need to plan for the cost of tools and materials, as well as labour if you hire someone to complete the project for you.

The cost of gravel for a shed base

Gravel costs about $1.25 to $1.80 per square foot, so for a 10x12 shed base, you can expect to pay between $125 and $180. This does not include the cost of tools and materials needed to complete the project, or labour costs if you hire someone to do it for you.

You will need around 15kg of pea gravel per square, so for a 10x12 base, you will need approximately 180kg of gravel. This will cost around $200 to $288.

It is important to use the correct type of gravel for your shed base. 'Angular' shaped gravel is recommended over 'pebble' shaped gravel, and '3/4" clean' stone is also suggested.

The type of gravel to use for a shed base

It is also recommended that the shed foundation should extend 12 inches on each side of the shed. So, for an 8x6 shed, a 10x8 foundation is recommended. This will ensure that the shed is stable and secure.

When it comes to the amount of gravel needed, it depends on the depth and size of the shed base. For a shed base that is 4 inches deep, you will need approximately 0.9 cubic meters of gravel. This equates to about 810 kilograms or 900 litres of gravel.

It is important to note that the type of gravel used should be angular-shaped and not pebble-shaped. This is because angular gravel interlocks and provides a stronger base. Pebble-shaped gravel can shift and move, creating an unstable base.

Finally, the cost of gravel for a shed base is also a consideration. Gravel costs about $1.25 to $1.80 per square foot, or around $200 to $288 for an average 10-by-16-foot shed base.

The size of the shed base

It is also important to consider the depth of the gravel. The recommended depth is 4" at all points of the shed. This will ensure that the shed has a strong and stable foundation.

To calculate the volume of gravel needed, you can multiply the length, width, and depth of the shed base. In this case, the volume would be 10x8x0.33 feet, which equals approximately 26.4 cubic feet.

You can also calculate the volume in cubic meters, which is useful for purchasing gravel. The volume in cubic meters would be approximately 0.75 cubic meters (0.75 m^3).

It is recommended to use '3/4" clean' stone for the gravel shed foundation. This type of stone is free of fine particles and is ideal for providing a stable base.

Frequently asked questions