Maya Ellison
Keeping your Nutribullet clean is essential to ensure you're blending with a sanitized appliance. While the Nutribullet is easy to clean, there are specific methods to follow to avoid damaging the appliance. To decalcify your Nutribullet, you should first power off and unplug the appliance. Next, remove the blade from the cup and rinse both the blade and the cup immediately to prevent food from sticking. Then, fill the cup with water and soap and attach the blade. Place the cup on the power base for 20-30 seconds to blend the soap and water. After blending, rinse the cup and blade, and dry with a rag or air dry.
| Characteristics | Values |
|---|---|
| Cups, lids, lip rings, and blades | Top-rack dishwasher-safe |
| Before putting in the dishwasher | Rinse them |
| Sanitize cycle | Should not be used as it may warp the plastic |
| Spill within the power base | Shut down, unplug, remove blade and cup, and wipe up spillage with a damp sponge or towel |
| Deeper clean | Use a small brush but never submerge the power base in water and never put it in the dishwasher |
| Power base | Allow it to fully dry before using it again |
| Blades | Wash by hand with warm, soapy water and a dish brush to loosen any stuck-on debris |
| Deeper clean for blades | Rinse with a 10% dilute vinegar and water solution or lemon juice |
| Cup | Wash by hand with warm water and a sponge and dish soap or put it in the top rack of a dishwasher |
| Stuck-on ingredients | Fill the cup with warm water and dish soap, screw on the extractor blade, and run the Nutribullet for 20-30 seconds |
| Cup and blades | Dry with a rag or air dry |
| Blade portion | Wash with soap and water by hand with a sponge, keeping fingers away from the sharp edge |
| Blade portion | Do not put in the dishwasher as high heat can warp and melt the plastic |
Explore related products
What You'll Learn
Rinse the cup and blade immediately after use
Rinsing the cup and blade immediately after use is an important step in maintaining your Nutribullet blender. It is crucial to prevent the build-up of food residue, which can become a breeding ground for bacteria, leading to potential health risks. A quick rinse under running water helps to dislodge any remaining food particles, preventing them from hardening and becoming more challenging to remove later. This initial rinse is especially important if you are unable to perform a thorough cleaning immediately after use.
For a quick clean, fill the blender cup halfway with warm water and add a few drops of liquid dish soap. Secure the lid tightly and blend on a low setting for about 20 seconds, or until the cup's interior is sudsy. Pour out the soapy water and rinse the cup and blade thoroughly with clean water. Ensure that all soap residue is removed before the next use.
If your blender blades are still dirty, you may need to wash them separately. Remove the blades from the blender cup and hand-wash them with warm, soapy water, using a sponge or toothbrush to scrub away any stubborn debris. You can also soak the blades in hot water with a commercial antibacterial agent or use a small brush for a deeper clean, being careful not to submerge the power base.
Always remember to dry the cup and blade thoroughly before storing. Leaving the blender damp can lead to condensation and provide an ideal environment for bacterial growth, resulting in unpleasant odours and potential health hazards.
Plastic Gas Tanks: Street Legal or Not?
You may want to see also
Explore related products
Wash the cup and blade with warm, soapy water
To wash the cup and blade with warm, soapy water, start by filling the cup 2/3 of the way with warm water. Add two drops of dishwashing liquid to the cup. You can also add a coarsely chopped lemon to help clean the inside of your cup. Next, screw the blade onto the cup. Turn the blade counter-clockwise until it is tightly connected to the cup. Place the cup on the power base and blend the soap and water inside for 20-30 seconds.
After blending, power off your Nutribullet and unplug the power base. Remove the blade from the cup. Rinse the blade and cup immediately to avoid stuck-on foods. Wash the cup and blade by hand using a sponge. Ensure you thoroughly wash out the interior and exterior of the cup and blade. You can also use a dish brush to loosen any stuck-on debris.
If you want a deeper clean, rinse the blade with a 10% dilute vinegar and water solution or lemon juice. Dry the cup and blades with a rag or place them on a drying rack to air dry.
Plastic in Fish: What's the Deal?
You may want to see also
Explore related products
$11.99 $16.99
Dry the cup and blades
After cleaning your Nutribullet, it is important to dry its components thoroughly before using them again. This is especially important for the power base, which should never be submerged in water. Instead, wipe it down with a damp sponge or towel and let it air-dry completely before plugging it in and turning it on.
The cup and blades of the Nutribullet can be dried in a few different ways. One way is to place them upside down on a drying rack or clean towel, ensuring that the water can drip off and evaporate. You can gently shake or tap the components to remove excess water and speed up the drying process.
Another option is to use a clean, dry cloth or paper towel to wipe down the cup and blades. This method absorbs the water and helps to speed up the drying time. Make sure to be careful when handling the blades, as they are sharp.
Additionally, you can air-dry the cup and blades by placing them in a well-ventilated area. This method may take longer, but it ensures that all components are thoroughly dried. Leaving them near a window or fan can help accelerate the process by providing a constant flow of fresh air.
It is important to ensure that all components of the Nutribullet are completely dry before reassembling and using the device again. This helps maintain the longevity of the product and prevents the growth of bacteria or mould.
Plastic Knuckles: Legal Status in Wisconsin
You may want to see also
Explore related products
Clean the power base
To clean the power base of your Nutribullet, start by powering off the device and unplugging the power base. It is important that there is no electricity running through your Nutribullet before you begin cleaning. If you encounter a spill within the power base, use a damp sponge or towel to wipe up any spillage. Remove the blade and cup and wipe around any internal components, but do not remove any parts from within the power base. A small brush may be used for a deeper clean, but never submerge the power base in water and never put it in the dishwasher. Always allow the power base to fully dry before using it again.
Melting Plastic: Does It Lose Weight?
You may want to see also
Explore related products
Do not submerge the power base in water
If you encounter a spill within the power base of your Nutribullet, immediately shut down and unplug the device. Remove the blade and cup and use a damp sponge or towel to wipe up any spillage. Do not remove any parts from within the power base; simply clean around them.
A small brush may be used for a deeper clean, but never submerge the power base in water and never put it in the dishwasher. Allowing water to enter the power base may damage the device. If you accidentally submerge the power base, allow it to dry for at least a day before testing it out. However, if it was significantly exposed to water, there is a risk of rusting or seizing up.
To reiterate, it is important to never submerge the power base in water. Always unplug the power base and remove the blade and cup before cleaning up any spills with a damp sponge or towel. Allow the power base to fully dry before using it again.
In addition to the above, it is recommended to replace blades every 6 months if you use the Nutribullet regularly. A 10% solution of bleach to water will remove any cloudiness from the cups. Always wash the blades by hand with warm, soapy water and a dish brush to loosen any stuck-on debris. If you want a deeper clean, rinse the blade with a 10% dilute vinegar and water solution or lemon juice.
Kirkland Detergent Pods: Plastic Coating or Not?
You may want to see also
Frequently asked questions
Fill the cup with water and add a few drops of dish soap. Screw the blade onto the cup and place it on the power base. Blend for 20-30 seconds. Rinse the cup and blade with water. Dry the cup and blade with a rag or let them air dry.
Wash the blades by hand with warm, soapy water and a dish brush to loosen any stuck-on debris. You can also use a sponge, but be careful to keep your fingers away from the sharp edges.
The Nutribullet cups, lids, lip rings, and blades are all top-rack and dishwasher-safe. However, it is recommended that you rinse them before placing them in the dishwasher and avoid using the sanitize cycle as it may warp the plastic.
