Sofia Martinez
Plastic coil binding, also known as spiral binding, is a popular method for binding books and documents. It involves using a continuous plastic spine that spins around into many loops, creating a flexible and durable finish. To finish off a plastic coil binding, cutting and crimping pliers are typically used. This tool allows you to cut off any excess plastic coil and crimp the edge, preventing the coil from spinning out of the book. The process is simple and involves positioning the pliers with the red dot facing up, placing the pliers' tip into the right side of the coil, squeezing the handles, and then flipping the book over to repeat the process.
| Characteristics | Values |
|---|---|
| Binding Method | Spiral Binding or Plastic Coil Binding |
| Appearance | Continuous spiral look with a modern touch |
| Durability | Very durable, flexible, and can withstand heavy handling |
| Page Turning | 360-degree page turning |
| Affordability | Economical plastic, priced at $0.05 per book for letter-size documents |
| Temperature Sensitivity | Sensitive to extreme temperatures (can melt or become fragile) |
| Page Alignment | Pages do not align perfectly from side to side |
| Finishing Tool | Cutting and crimping pliers |
Explore related products
What You'll Learn
Using cutting and crimping pliers
To use cutting and crimping pliers, first, place your coiled document flat on a table. Look at the pliers, and you will see one side has a red dot, and the other side doesn't. With the red dot facing up, position the pliers into the right-hand side of the document. Ensure that the crimper is placed in the centre of a curved coil.
Next, squeeze the handles to cut the coil. Continue to apply pressure until the pliers are completely closed to crimp the coil. This will cut the excess plastic spiral coil off and crimp in the edge, preventing the coil spine from spinning out of your book.
Finally, flip your book over and repeat the above steps on the other side. And that's it! In just four simple steps, you can finish your spiral coils and have a professionally finished spiral-bound book.
Some things to keep in mind: for step 2, ensure that the positioning of the crimper head on the coil is correct to ensure a completed crimp. Make sure it is centred on the curve of a spiral for the best results.
Installing Threaded Inserts: Plastic Guide for Beginners
You may want to see also
Explore related products
Positioning the pliers
To finish off a plastic coil, you will need cutting and crimping pliers. These pliers are designed to cut and crimp plastic spiral binding coil elements with a quick squeeze of your hand. Place your coiled document flat on a table. Ensure that the side of the pliers with the red dot is facing up. Now, position the pliers into the right-hand side of the document with the cutting head in the centre of the coil of the book. It is important that the pliers are not placed too far down or too far up, but right into the centre of the coil. If the pliers are not positioned correctly, they will not crimp.
Now, squeeze the handles of the pliers. Flip the book over and repeat the above steps on the other side. This is because the cutting crimping pliers only crimp in one direction. The pliers cut the excess plastic spiral coil off and crimp in the edge to prevent the coil spines from spinning out of your book. This is a simple process that will give your spiral-bound book a clean and professional finish.
It is important to note that the positioning of the crimper head on the coil is crucial to ensure a completed crimp. The crimper head should be placed in the centre of a curved coil.
Plastic Mountaineering Boots: How Large is Too Large?
You may want to see also
Explore related products
Squeezing the handles
To finish off a plastic coil, you can use cutting crimping pliers. These are a manual tool that cuts and crimps plastic spiral coils. They are designed to be used with one quick squeeze of your hand. Here is a step-by-step guide:
Firstly, place your coiled document flat on a table. Then, check your pliers—one side will have a red dot, and the other side won't. Ensure that the side with the red dot is facing up. Now, position the pliers into the right-hand side of the document with the cutting head in the centre of the coil. It is important that the cutting head is positioned correctly—not too far down, and not too far up, but in the centre of the coil. If the cutters are not positioned properly, they will not crimp.
Now, squeeze the handles. This action will cut the excess plastic coil off and crimp the edge in, preventing the coil from spinning out of your book. Then, flip your book over and repeat the above steps on the other side.
If you are binding a large number of books, you may prefer to use an electric coil crimping machine. These machines cut and crimp the coil in one motion, providing quality results with minimal effort.
The Plastic Problem: How We're Exposed
You may want to see also
Explore related products
Flipping the book
To begin, place your coiled document flat on a table. Identify the side of the pliers with the red dot and ensure that it is facing up. Next, position the pliers' tip into the right-hand side of the document, centering the cutting head in the middle of the coil. It is crucial to ensure the cutters are positioned correctly; they should not be too far down or up.
Now, squeeze the handles of the pliers. After completing this step, flip the book over and repeat the procedure on the other side. This process will ensure that your spiral-bound book has a clean and professional finish.
By following these steps, you will effectively finish off the plastic coil and prevent it from spinning out of the book.
Burnt Plastic Smell: A Cancer Risk?
You may want to see also
Explore related products
Repeating the process
To finish off a plastic coil, you will need cutting and crimping pliers. These are designed to cut and crimp plastic spiral binding coil elements with one quick squeeze of your hand. Place your coiled document flat on a table. Look at the pliers—you will see one side has a red dot, and the other side doesn't. With the red dot facing up, position the pliers into the right-hand side of the document with the cutting head in the centre of the coil. Now, squeeze the handles. Then, flip the book over and repeat the procedure.
Now, to repeat the process, you will need to gather more printed sheets and insert them into the opening. When the paper is fully inserted, slide the stack to the left until it makes contact with the paper guide. Tap the sides of the stack to ensure all the edges of the sheets are flush. Press the foot pedal, button, or pull the handle to punch the sheets. Repeat this step until all the pages you want in your book are punched.
Next, manually insert and spin the plastic coil into the first three or four holes of your stack. If you are using an electric coil inserter, hold the binding edge of the book with the coil against the activated spinning rollers. Once you have done this, you will need to cut and crimp the coil again using the pliers, as described above.
You can continue to repeat this process as many times as you like to add more pages to your book. When your book is complete, end the binding by staggering the ends of your plastic strands so that the cord gets thinner. Weave the end of your yarn down through the rows below. You can knot it if you like, then weave in the end after the knot, and trim it close to the inside of the book.
India's Plastic Waste Crisis: A Growing Concern
You may want to see also
Frequently asked questions
You will need cutting and crimping pliers.
Place your coiled document flat on a table. Ensure that the red dot on the pliers is facing up, then position the pliers into the right-hand side of the document with the cutting head in the centre of the coil. Squeeze the handles, flip the book over and repeat the procedure on the other side.
They cut the excess plastic spiral coil off and crimp in the edge to prevent the coil spines from spinning out of your book.
