Omar Khalid
Hanging plastic Easter eggs is a fun way to decorate your home for the holiday. There are many ways to hang plastic Easter eggs, and no single right way to do it. You can separate the two halves of the egg and thread a ribbon through the inside, or tie yarn or twine through a hole in the top or bottom of the egg. You can also paint the eggs with pastel colours, add speckles, or decorate them with glitter nail polish. If you want to hang your eggs outdoors, you can add a small weight like a pebble to keep them from blowing around.
| Characteristics | Values |
|---|---|
| Number of eggs | 24 |
| Material | Plastic |
| Size | 2.3 inches tall, 1.6 inches in diameter |
| Colors | Multicolored |
| Design | Hand-painted |
| Ornament type | Hanging |
| Hanger | Ribbon, twine, yarn |
| Customization | DIY crafts with a marker pen |
| Use | Indoor/outdoor decoration |
Explore related products
$8.7 $9.7
What You'll Learn
Using ribbons or yarn
There are several ways to hang plastic Easter eggs using ribbons or yarn. One way is to separate the top and bottom halves of the egg and tape one end of a piece of ribbon inside the top half, using cellophane tape. You can then fold the ribbon up and around the top of the egg to make a loop that ends at the other side of the eggshell top, similar to a hanger. Adjust the length of the ribbon to make the loop as large as you'd like, depending on where you plan to hang the egg. Finally, cut the ribbon and fold it under the eggshell's rim, opposite the first taped edge. Snap the bottom half of the egg back on, and your decoration is ready to hang.
Another method involves drilling holes in the eggshells and threading ribbon through them. First, make four rows of six holes each on the egg, with three rows on the top half and three on the bottom. Clean the holes of any debris, and use a needle to thread the ribbon from the inside to the outside of the egg. Glue the loose end of the ribbon to the inside of the egg, and then wrap the ribbon around the egg, threading it through the holes. Repeat this process a few times, creating a crisscross pattern with the ribbon. Secure the ribbon with a knot, and trim any excess.
If your plastic eggs already have holes at the top and bottom, you can create a hanger by folding a piece of yarn or twine in half and pushing the folded portion through the hole in the bottom of the egg. Separate the egg halves to grab the yarn and pull it through the top half. Tie a knot near the ends of the yarn so that it stays securely outside the bottom of the shell.
Feel free to experiment with different colours and widths of ribbon or yarn to create unique and festive decorations. You can also try combining these techniques or adding your own creative twists to make your hanging plastic Easter eggs truly one-of-a-kind!
Plastic-Lid Mason Jars: A New Twist on a Classic
You may want to see also
Explore related products
Drilling holes
Next, carefully drill a hole in each end of the egg. You can make the hole in the bottom of the egg a little bigger by moving the drill around a bit as you're drilling. If you plan to hang your eggs with ribbon, you will also need to drill four rows of six holes each along the length of the egg, with three rows on the top half and three on the bottom.
Once you've finished drilling, clean the holes of any debris. This can be done with an Exacto knife and a clay digging tool to scoop out the mess from the inside of the holes.
Now you're ready to start threading your ribbon!
Aging White Plastic Guitar Parts: DIY Techniques and Tricks
You may want to see also
Explore related products
Decorating eggs with paint or glitter
Plastic Easter eggs can be decorated in a variety of ways using paint or glitter. Here are some ideas to get you started:
Using Paint
Before you begin painting, push a wooden skewer into one of the holes in the egg. This will give you something to hold onto while you paint and will allow you to stand the eggs up to dry. It is also recommended to give your egg a coat of primer or Gesso to ensure the paint will adhere to the plastic. You can then decorate your egg with paint using a variety of techniques:
- Paint your egg in soft pastel colours and decorate with squiggles, dots, and zigzags using a fine liner brush.
- Paint your egg in bold, bright colours and dab with a sponge brush dipped in a contrasting colour.
- Use tempera paint and washi tape to create graphic designs. Wrap the egg in thin washi tape, pressing it firmly onto the eggshell. Paint over the tape with tempera paint, let it dry, then remove the tape.
- Use a paintbrush handle dipped in paint to create perfectly round dots.
Using Glitter
There are a few different ways to decorate your eggs with glitter:
- Dye your eggs and leave a portion of each egg undyed. Cover the undyed portion with glitter for a cool effect.
- Use craft glue and sequins to cover your egg in a glittery coating.
- For a mess-free option, use adhesive-backed rhinestone jewels to create unique designs on your eggs.
Once your eggs are dry, you can brush on a coat of craft varnish to add a glossy sheen and protect the paint or glitter from chipping or scratching.
How Plastics Harm Marine Life
You may want to see also
Explore related products
Hanging from a tree or shrub
Hanging plastic Easter eggs from a tree or shrub is a fun way to decorate your outdoor space for Easter. You can buy plastic Easter eggs with pre-attached ribbons or strings, or you can add your own.
If you want to add your own hanging mechanism, you can separate the two halves of the egg and tape one end of a piece of ribbon inside the top half. Fold the ribbon up and around the top of the egg to make a loop that ends on the other side of the eggshell top. Snap the bottom half of the egg back on, and it's ready to hang. You can also add a small weight, like a pebble, inside the bottom half of the egg to stop it from blowing around too much.
If your plastic eggs have holes at both ends, you can create a hanger by folding a piece of twine, yarn, or jute in half and pushing the folded portion through the hole in the bottom of the egg.
You can also decorate your plastic eggs before hanging them from a tree or shrub. Paint them with pastel colours, add speckles by flicking paint with a toothbrush, or decoupage torn bits of newspaper or old book pages onto the eggs.
Generating Electricity from Plastic: A Viable Solution?
You may want to see also
Explore related products
Making an Easter garland
Gather Your Materials
You will need plastic Easter eggs, ribbon or string, scissors, tape, and any desired decorations for the eggs. You can find plastic Easter eggs at most craft stores or online. Consider using colourful baker's twine or ribbon with pastel patterns to add a festive touch.
Prepare the Eggs
If you want to decorate the eggs, do so before assembling the garland. You can paint the eggs with chalk paint in pastel colours and add your own speckles by flicking paint with a toothbrush. You can also decoupage torn pieces of newspaper or old book pages onto the eggs for a unique texture.
Assemble the Garland
The simplest way to string the eggs is by using the small holes that are often already present in plastic eggs. Take the smaller half of the egg and set the larger half aside. Tape one end of your string or ribbon to prevent fraying and make it easier to thread. Thread the string or ribbon through one hole and out the other, then tie a knot to keep the egg in place. Repeat this process with the remaining eggs, leaving enough excess string or ribbon between each egg to allow them to hang.
Finishing Touches
Once all the eggs are threaded, you can add treats or small gifts inside the eggs and snap the larger halves back into place. If desired, finish each egg with a gold number sticker, or add a small weight like a pebble inside if you plan to hang the garland outdoors. Finally, hang your Easter garland on a mantel, door frame, or anywhere else that could use a festive touch!
There are many ways to customise and decorate your Easter garland, so feel free to get creative and make it your own!
Welding Plastics: Techniques for Heat-Joining Plastics
You may want to see also
Frequently asked questions
There are several ways to hang plastic Easter eggs. You can separate the two halves of the egg and tape a loop of ribbon inside, or tie yarn, twine or string through a hole in the top or bottom of the egg.
You will need plastic Easter eggs, ribbon, yarn, twine or string, and optionally, tape and scissors.
You can hang plastic Easter eggs anywhere you like! Hang them outdoors on a tree or shrub, or inside from a mantel or door frame.
Decorating plastic Easter eggs before hanging them is not necessary, but it can make for a more fun activity. You can paint the eggs with pastel colours, add speckles with a toothbrush, or use glitter nail polish for stripes and designs.
