Alexei Volkov
The Army Painter offers a range of hobby products, including paints, colour primers, glues, brushes, and tufts. One of their popular products is the Army Painter Plastic Glue, which is often used for gluing plastics and miniatures. However, some users have faced challenges when trying to open the glue bottle, with some suggesting inserting a needle or pin inside, but others finding that cutting the nozzle at an angle with a hobby knife and then pushing a thick needle through it works better. In addition, the viscosity of the glue can make it challenging to control the amount dispensed, and users recommend applying the glue with a needle or toothpick to manage this issue.
| Characteristics | Values |
|---|---|
| Opening Method | Inserting a needle or pin inside |
| Application | Advisable to use a needle or toothpick due to viscosity |
| Cleanup | Easy to clean up glue residue |
| Usage | Can be used for gluing rocks, sand, grass, or other similar basing materials to a miniature base or terrain |
| Price | €4.99 |
Explore related products
What You'll Learn
Use a pin or a needle to pierce the bottle
If you are struggling to open your bottle of Army Painter Plastic Glue, one method you can try is using a pin or a needle to pierce the bottle. This method is suggested by some users online, although others have reported that it doesn't work for them.
To start, ensure you have a suitable pin or needle. It should be thick enough to create a sizeable hole in the nozzle, allowing the glue to flow through. You may want to cut the nozzle at a 45-degree angle with a hobby knife first, to provide a fresh surface for the pin or needle to pierce. This can help create a clean hole and improve the flow of the glue.
When you are ready, firmly and carefully push the pin or needle through the nozzle of the glue bottle. You may need to apply some force, especially if the glue has become thick or partially clogged. It is important to be cautious and use appropriate protective gear, such as gloves and eye protection, to prevent any accidents.
Once you have successfully pierced the nozzle, you can begin to dispense the glue. Due to the high viscosity of the glue, you may need to squeeze the bottle quite firmly. You can also consider using a needle or a toothpick to apply the glue to your project, as this can give you more control over the amount of glue dispensed.
Remember to clean up any glue residue immediately, as Army Painter Plastic Glue can create a strong bond and is difficult to remove once it has dried. Additionally, if you are looking for a long-lasting alternative, Army Painter Super Glue is a popular choice that is offered by the same company.
Spray Paint Secrets: Shining Plastic Surfaces
You may want to see also
Explore related products
Cut the nozzle at a 45-degree angle with a hobby knife
To open Army Painter plastic glue, you will need to cut the nozzle at a 45-degree angle with a hobby knife. This type of glue is highly viscous, so you will need to apply significant force to squeeze it out of the bottle. Cutting the nozzle at an angle will help to create a wider opening, making it easier to dispense the glue.
When cutting the nozzle, ensure that you hold the knife at a steady 45-degree angle relative to the nozzle's edge. This will ensure a clean and precise cut. A steady hand is important to avoid any accidental slips or cuts to your hand.
Using a sharp hobby knife is crucial. A dull blade may not cut through the nozzle cleanly and could even cause the blade to slip, potentially resulting in injury. If you do not have a sharp hobby knife, consider using a fresh blade or replacing the existing one.
After cutting the nozzle, you may need to insert a thick needle or toothpick into the opening to facilitate the flow of the glue. This will help to pierce through any remaining obstruction and allow the glue to be dispensed more easily.
Removing Dried Paint from Rubber and Plastic Surfaces
You may want to see also
Explore related products
Use a thick needle or a toothpick to apply the glue
The Army Painter Plastic Glue is a fast-drying glue used for assembling plastic miniature models. It is known for its precision, durability, and artistic freedom, allowing users to modify various components of models and miniatures.
To open the bottle and use the glue effectively, it is recommended to use a thick needle or a toothpick. Here are some detailed steps and instructions for using a thick needle or a toothpick to apply the glue:
Preparing the Bottle:
Firstly, cut the nozzle of the bottle at a 45-degree angle using a hobby knife. This step is crucial to creating a clean opening for the glue to flow through. After cutting the nozzle, use the thick needle to pierce through the bottle neck. This action will open the flow of glue and ensure it can be easily dispensed. It is important to note that you may need to apply some force when pushing the needle through, as the glue is quite viscous.
Applying the Glue with a Needle or Toothpick:
Once the bottle is prepared, you can begin applying the glue to your project. Dip the thick needle or toothpick into the bottle and carefully withdraw a small amount of glue. The viscosity of the glue may cause a large amount to come out, so be cautious and wipe off any excess on the side of the bottle.
Next, carefully apply the glue to the desired areas of your miniature or model. The precision allowed by the needle or toothpick will enable you to create clean seams and strong bonds between plastic parts. Take your time during this step to ensure accuracy and avoid any unwanted glue application.
Using a thick needle or toothpick to apply The Army Painter Plastic Glue is a precise and effective method. It gives you greater control over the amount of glue dispensed and allows for detailed application. Remember always to read the instructions on the bottle carefully and take the necessary safety precautions, especially when working with children or flammable substances.
The Best Techniques for Painting Plastic Chrome
You may want to see also
Explore related products
Try a different type of glue, such as Tamiya Extra Thin
If you're struggling to open your Army Painter plastic glue, you might want to consider switching to a different type of glue entirely, such as Tamiya Extra Thin Cement. This is a popular glue used by modelers worldwide and can be found in most workshops.
Tamiya Extra Thin is perfect for gluing plastic parts together, especially in desired positions that require holding in place. The thin consistency allows it to flow smoothly into the gaps between fitted parts, ensuring a strong bond. It's also useful for attaching parts that have been pre-fitted by hand, as it can easily reach tight spaces.
The quick-setting variant of Tamiya Extra Thin Cement dries around four times faster than the original, typically within 10 seconds, saving you time and energy holding parts in place. However, it is recommended to be sure of your parts' attachment and fit when using this faster-setting glue.
The original Tamiya Extra Thin Cement dries within 40 seconds and is ideal for situations where you need to fill larger gaps and seams. The glue is also available in a 40ml bottle with a brush on the underside of the cap for easy application.
When using Tamiya Extra Thin, be aware that it may not work well with smaller models that require assembly from contact instead of slotting together. You may find it challenging to hold the small model parts firmly together while the cement sets. However, for normal-sized models, this cement is excellent, providing strong bonding and precise placement without unsightly glue spots.
Prevent Spray Paint from Chipping Off Plastic Surfaces
You may want to see also
Explore related products
$5.97 $7.48
Clean up any glue residue to maintain the quality of the glue
To clean up any glue residue and maintain the quality of the glue, it is important to follow these steps:
Firstly, identify the type of residue you are dealing with. If it is still in a liquid state, simply use a clean cloth or cotton swab to wipe away the excess glue from the application surface. Make sure to do this quickly, as plastic glue dries fast. If the glue has already dried, carefully scrape off as much of the residue as possible using a hobby knife or a similar tool. Be gentle to avoid damaging the surface of your project.
For any remaining residue, you can use a solvent to dissolve it. There are several options available at your local hardware store or hobby store. Look for common organic solvents in the paint aisle, as plastic glue is made up of various organic solvents. You can also try using a product like Tamiya Extra Thin, which has been recommended by modellers as a great alternative to Army Painter's Plastic Glue.
Additionally, consider using a different application method to avoid future residue issues. Instead of squeezing the bottle, try using a needle, toothpick, or thin brush to apply the glue precisely where you need it. This will give you better control over the amount of glue being dispensed and reduce the likelihood of excess glue and residue.
Remember to always work in a well-ventilated area when using solvents and glues, and follow all safety instructions on the product labels. By following these steps, you can effectively clean up glue residue and maintain the quality of your Army Painter Plastic Glue.
Choosing the Right Paint for Plastic: A Guide
You may want to see also
Frequently asked questions
Army Painter Plastic Glue is viscous, so you need to squeeze it out of the bottle. You can cut the nozzle at a 45-degree angle with a hobby knife and push a thick needle or a pin through it.
You can try to restore its consistency by adding a solvent to it. You can find these solvents at a hardware store.
Army Painter Super Glue is a good alternative. It is easy to clean and comes with a long plastic feeder that helps apply the glue in precise doses.
