Maya Ellison
If you're wondering how to open a plastic USB case, there are a few methods you can try. One suggestion is to use a flat-head screwdriver to pry it open. You can try wedging it between the black lever and the case and wiggling it, or tapping it with a hammer into the four little slats on the bottom of the case, then twisting it. Alternatively, you could use a plastic knife to force your way between the edge and the bottom cover, starting on one of the long sides near the corner of the USB end of the drive case. You could also try using a weak magnet if there is a magnetic strip at the bottom of the casing.
Explore related products
![ArtBin 6977AB 12 inch Quick View Deep Base Carrying Case, Portable Art & Craft Organizer with Handle, [1] Plastic Storage Case, Translucent](https://m.media-amazon.com/images/I/41I4jtnSwQL._AC_UL320_.jpg)
What You'll Learn
Using a flat-head screwdriver
If your USB case has screws that need to be removed, you can use a flat-head screwdriver. Here is a step-by-step guide on how to do it:
First, ensure that the flat-head screwdriver fits snugly into the screw head. If it is too loose or doesn't fit well, try using a different size screwdriver. It is important to use the correct screwdriver to avoid damaging the screw head.
Next, apply downward pressure while twisting the screwdriver to the left. This will help keep the tip of the screwdriver from lifting out of the slot and prevent stripping the screw head. You may need to use a bit more force than you think, especially if the screws are "'locked" with a type of "glue" used to keep them from coming loose.
If the screws are particularly tight or stuck, you can try using a manual impact driver or some alternative tools and methods. For example, you can use a rubber mallet or non-marring hammer to strike the back of the screwdriver while it is straight and properly placed on the screw. You can also try using a coin, such as a penny, by placing its edge into the longest groove of the screw head and turning it counter-clockwise.
Additionally, if the screw is damaged or the screwdriver is too small, you can create a new slot for the flat-head screwdriver. You can use a Dremel or a similar tool to cut a slash or grind a small slit into the screw head. Keep in mind that this will damage the plastic casing.
By following these steps and using a flat-head screwdriver, you should be able to successfully open your Target plastic USB case and remove any screws that are securing it.
CATIA Contour Injection: Plastic Molding Perfection
You may want to see also
Explore related products
Plastic knives to pry it open
To open a plastic USB case with a plastic knife, you can follow these steps:
First, identify the long sides near the corner on the USB end of the drive case. These two corners do not have catches, making them easier to pry open. Gently force the tip of the plastic knife between the edge and the bottom cover in this area. Once you have created a small gap, you can start working the knife around the sides, gradually prying the case open. Be careful not to apply too much force, as you do not want to damage the internal components of the USB drive.
It is worth noting that the user who suggested this method mentioned that none of the corners have catches, but the two on the USB end have a larger area without them, making it easier to start the prying process there. This method may require some patience and finesse, but it can effectively open the plastic USB case without causing damage, and you can reuse the case if needed.
Additionally, some USB cases may have magnetic strips at the bottom, so you could also try using a weak magnet to open the case without prying it physically. However, if your case has a black lever or mechanism, you might need to use a flat-head screwdriver to wiggle and pry it open. Be cautious, as this method may cause broken pieces of plastic to fly off, so ensure you take the necessary precautions.
Attaching Plastic Chains: A Step-by-Step Guide
You may want to see also
Explore related products
Using a weak magnet
If your Target plastic USB case has a magnetic strip at the bottom, you can use a weak magnet to open it. Place the weak magnet on the strip at the bottom of the case, and it should open up. If there is a magnetic strip on top of the case, place a weak magnet on it, and the latch on the left side should shift to an “open” position.
You can also try placing a magnet on the left and right of the locking bar and sliding them towards the right until the red icon turns green. Hold the locking bar and pull the case apart. The magnets you use can be any household magnet, like those found on your fridge.
If the case does not open, try again using stronger magnets. You can also try buying a magnet to open the case online for a low price.
Is Your Plastic Container Safe for the Microwave?
You may want to see also
Explore related products
Using a spudger
Spudgers are a great tool to use when opening a plastic USB case as they are designed to minimise damage. You can buy spudgers from Amazon and other similar sites. If you don't have a spudger, you can use a plastic knife, a guitar pick, a credit card, or even your fingernails. However, be aware that these alternatives may not be as effective as a spudger and could potentially damage your device.
To use a spudger to open a plastic USB case, follow these steps:
- Start on one of the long sides of the USB case, near the corner on the USB end of the drive case. These two corners usually don't have catches, making them easier to pry open.
- Gently insert the tip of the spudger between the edge and the bottom cover of the case.
- Work the spudger around the sides of the case, applying gentle pressure to loosen the catches.
- Once you have released all the catches, you should be able to carefully pry open the case.
Remember to be gentle and take your time when using a spudger or any other tool to open a plastic USB case. Forcing the tool can result in damage to the case or its internal components. If you are unsure or uncomfortable with the process, consider seeking professional help to avoid potential damage to your device.
Plastic Ban: Taxpayers' Money and Environmental Benefits
You may want to see also
Explore related products
Taking it back to Target
If you've purchased a plastic USB case from Target and need to return it, you can rest assured that Target has a generous return policy and aims to make the process as smooth as possible.
Firstly, it's important to note that Target's return policy for electronics and entertainment items is subject to a 30-day return window, excluding Apple products, which must be returned within 15 days. So, make sure you're within this time frame for a smooth return process.
Secondly, don't worry if you don't have the receipt anymore. If you made the purchase using a debit or credit card, Target can look up your receipt. If you purchased the item while logged into your Target account, either online or during store checkout, you can access your Target account through their app or website to find the record of your order and produce a return barcode.
When returning the item, you can choose to get a refund or exchange it for another product. If you're unsure about the specific USB case you purchased or have any issues with the return process, Target's customer service team will be happy to assist you. They stand behind their products and are known for their lenient stance on returns.
Lastly, if you're returning the USB case because you're struggling to open it, there are some tips online that might help. Some people have suggested using plastic knives or a spudger to carefully pry open the case, starting at one of the long sides near the corner on the USB end, as these corners don't have catches and will be easier to work with. With a bit of patience and careful prying, you should be able to open the case without causing any damage.
The Best Static Pressure Tip for Your 3D Printer
You may want to see also
Frequently asked questions
You can use a plastic knife to force the edge between the bottom cover and the USB end. Start on one of the long sides near the corner of the USB end as these corners don't have catches. Work the knife around the sides to loosen it.
You can use a spudger or a flat-head screwdriver.
Tap the screwdriver with a hammer into the four little slats on the bottom of the case. Once it's wedged in, twist it. You can then flip open the latch.
Yes, some cases have magnetic strips at the bottom. You can use a weak magnet to open these cases.
