Omar Khalid
There are several ways to stiffen plastic Savage stocks. One method involves using epoxy resin, such as JB Weld, Devcon, or standard two-part epoxy, to fill in the front of the stock or the forearm. This can be combined with carbon arrow shafts, steel or aluminium rods, or other materials like fiberglass mat and driveway markers. Another approach is to use a product like Stock Stabilizer from Nathan Forester or purchase an upgraded stock like Boyd's or Bell and Carlson Medalist. While some suggest that stiffening plastic stocks may not be necessary, others have found success in improving the feel and reducing recoil.
| Characteristics | Values |
|---|---|
| Products to stiffen the stock | Stock Stabilizer from Nathan Forester, Devcon, JB Weld, Gorilla Glue, Marine Tex, Acetone, Epoxy, Resin, Fiberglas mat, Fiberglas rod, Steel rod, Carbon arrow, Aluminum bar, Spray paint, Tupperware stock, McMillan stock, Boyd's Prairie hunter design |
| Methods to stiffen the stock | Filling the forearm with a product, Wrapping the stock with vet tape, Bedding the rifle, Cutting the ribs, Dremeling out a slot, Sanding the stock, Pouring epoxy into the forearm, Installing rods and bars into the stock |
| Stock types | Plastic stock, Synthetic stock, Polymer stock, Wood stock, Poly stock, Accustock, Aluminum block stock |
Explore related products
$11.35 $11.94
What You'll Learn
Using epoxy to fill the stock
When it comes to stiffening a plastic Savage stock, one popular method is to use epoxy to fill the stock and increase its rigidity. This process can improve the accuracy and consistency of your rifle by reducing flex and vibration. Here's a step-by-step guide on using epoxy to fill your Savage stock:
The first step is to gather the necessary materials: you will need a two-part epoxy resin and hardener, mixing containers and sticks, and a release agent to prevent the epoxy from bonding to your work surface. It is also recommended to have personal protective equipment, such as gloves and eye protection, when working with epoxy. Ensure your work area is well-ventilated as well.
Before mixing the epoxy, prepare your Savage stock by cleaning it with a solvent or alcohol to remove any oils or debris. Lightly sand the interior of the stock to create a rough surface that will help the epoxy bond better. You can use a Dremel tool or similar to create additional texture if desired. Just be sure not to sand too aggressively, as you don't want to thin the walls of the stock.
Now, it's time to mix your epoxy. Follow the manufacturer's instructions for the specific epoxy you've chosen, as mix ratios and cure times can vary. Generally, you'll want to mix a small batch at a time, as epoxy has a limited pot life before it starts to cure. Mix thoroughly, ensuring there are no streaks of unmixed resin or hardener, and be mindful of the temperature, as colder temperatures will make the epoxy thicker and slower to cure.
Once your epoxy is mixed, it's ready to be applied to your Savage stock. Start by coating the interior of the stock with a thin layer of epoxy, ensuring all areas are covered. You can use a brush or spatula to apply the epoxy, working it into any nooks and crannies. Pay particular attention to the areas around the action screws and the recoil lug, as these are key stress points.
After the initial coat has been applied, you can add more epoxy to build up the thickness and rigidity. Depending on your preferences and the stock design, you may want to focus on specific areas, such as the fore-end or the grip, to fine-tune the rigidity and balance of the stock. Ensure that the epoxy is level and smooth, as it will cure to shape.
Finally, allow the epoxy to cure completely according to the manufacturer's instructions. This may take several hours or even days, depending on the epoxy and the temperature. Once cured, you can remove the excess epoxy that has squeezed out of the stock, and your rifle is ready for reassembly and testing.
Remember, this process is a permanent modification, so it's important to take your time and work carefully. Always follow safety instructions when working with epoxy and other chemicals.
Black Plastic Disposal: What's the Right Way?
You may want to see also
Explore related products
Adding a carbon arrow shaft
To add a carbon arrow shaft, you will need to follow these steps:
- Cut a carbon arrow shaft lengthwise. You can use a Dremel saw blade to cut the arrow shaft.
- Cut two channels into the stock. These channels should be slightly lower than the top of the barrel channel and placed a bit back from the end to accommodate the arrow shaft without compromising the stock.
- Rough up the arrow shaft with sandpaper to help the epoxy adhere better.
- Epoxy the arrow shaft into the channels. Use a strong epoxy like JB Weld, Devcon Steel, or Marine Tex, and fill in any remaining voids.
- You can also use additional epoxy, such as Devcon/Marinetex or fiberglass epoxy, for extra stiffness. Cut small channels away from the arrow shaft to provide a better foundation for the epoxy.
- Smooth out any bubbles in the epoxy with a Popsicle stick.
- Allow the epoxy to set and cure completely before using the stock.
This method has been proven successful by many users, resulting in a stock that looks, shoots, and feels almost as good as more expensive options. It is a cost-effective way to improve the performance and feel of your plastic Savage stock without having to invest in a new one.
Plastic Strain: Calculating Accumulated Values for Accuracy
You may want to see also
Explore related products
Using JB Weld
JB Weld is a two-part adhesive that can be used to stiffen plastic Savage stocks. It comes in a variety of formulas, including original, KwikWeld, MarineWeld, ClearWeld, MinuteWeld, PlasticWeld, PlasticBonder, WoodWeld, and HighHeat. The original formula sets in 4-6 hours and cures in 16-24 hours, while other formulas like KwikWeld and ClearWeld set and cure much faster.
When using JB Weld to stiffen a plastic Savage stock, it is important to follow the instructions on the packaging carefully. Make sure the surface is clean and free of debris before applying the adhesive. Mix the two parts of the adhesive in a 1:1 ratio, as per the instructions, and apply it to the stock. You can use a syringe or a putty stick for precise application and gap-filling.
For best results, it is recommended to let the JB Weld set for a few minutes before pouring it into the stock. Once applied, allow it to cure completely before handling the stock. The cure time will vary depending on the formula you choose, so refer to the product instructions. After curing, you can sand and paint the JB Weld if desired.
In addition to using JB Weld, you can also combine it with other materials to stiffen the stock. Some people have used JB Weld in conjunction with a carbon arrow shaft or a steel rod for added reinforcement. This involves cutting a channel in the stock, inlaying the carbon shaft or inserting the steel rod, and then filling the voids with JB Weld or epoxy. This method can provide a more robust solution for stiffening the plastic Savage stock.
Starting a Plastic Packaging Business: A Comprehensive Guide
You may want to see also
Explore related products
Installing steel or aluminium rods
Firstly, you need to decide on the type and size of the rod. Steel rods are stronger, but aluminium is lighter and may be a better option if you don't want to add too much weight. The diameter of the rod should be considered, as a larger diameter will provide more rigidity but may be too big to fit into the stock.
Once you have your rods, you will need to prepare the stock by cutting grooves or channels into the plastic. This can be done with a Dremel or a drill, and the grooves should be deep enough to accommodate the rods. It is important to roughen the surface of the plastic to help the rods adhere better. This can be done by sanding or using a dremel engraving tip. You may also need to degrease the plastic with acetone to remove any plasticizers that could interfere with the bonding process.
Next, insert the rods into the grooves and secure them in place with an epoxy adhesive. A standard two-part epoxy should work, but you can also use specialised products like Devcon or JB Weld. Make sure to follow the instructions on the epoxy packaging for the best results.
Finally, you will need to sand and paint the stock to smooth out any imperfections and give it a finished look. This process can be time-consuming and may require some trial and error to get the desired results. It is important to note that even with these modifications, a cheap stock may still flex more than a high-quality one.
Plastic Feel of Cowboy Hats: What's the Deal?
You may want to see also
Explore related products
Buying a new stock
If you are looking to buy a new stock for your Savage rifle, there are a variety of options available. Firstly, it is important to consider the type of stock you require, such as a wooden or synthetic stock. Savage offers a range of rifle models with different stock options. For example, the Savage Axis is available with either wood or synthetic stocks, while the Savage Mark II features a detachable magazine and the patented AccuTrigger system.
If you are looking for a custom stock, companies like H-S Precision can design and manufacture a stock tailored to your specific requirements. They use state-of-the-art manufacturing techniques and guarantee unmatched accuracy in the firearms industry.
Another option is to purchase an aftermarket stock, such as those offered by Boyd's Gunstocks. They provide stocks for various Savage rifle models, including the 110, Axis, and A22. Boyd's stocks are known for their quality and adjustability, allowing for a more personalised shooting experience.
Additionally, you may want to consider the NextGen UltraLite Carbon Fiber M50™ stock, specifically designed for the Savage 110. This stock is renowned for its strength and lightweight construction, utilising carbon fibre cloth and proprietary curing techniques. It also features an integrated Accublock®, a lightweight composite material that provides exceptional strength and stability.
When buying a new stock, it is essential to consider factors such as compatibility with your rifle, the desired weight and balance, and any specific features you require, such as adjustable comb height or recoil reduction.
Remolding Plastics: DIY Home Techniques
You may want to see also
Frequently asked questions
You can use a combination of JB Weld, epoxy, carbon arrow shafts, and aluminium or steel rods. You can also use Devcon, which is aircraft-grade epoxy mixed with stainless steel dust.
There are many ways to stiffen your plastic Savage stock. One way is to cut a carbon arrow lengthwise, cut two channels into the stock, and epoxy them in. You can also use a product called Stock Stabilizer from Nathan Forester.
You can use epoxy, JB Weld, Devcon, carbon arrow shafts, aluminium bars, and steel rods.
You can use a stiff carbon arrow shaft, which will add stiffness without too much weight. You can also use Gorilla Glue to attach a steel rod or carbon arrow to the stock.
