Cleaning Your Phone Case: A Step-By-Step Guide

how to wash plastic phone case

Our phone cases are exposed to heat, friction, and different surfaces, so it's no surprise that they get dirty. To keep your plastic phone case clean and prolong its life, it's recommended to wash it regularly. Here's a step-by-step guide on how to wash your plastic phone case effectively:

How to Wash a Plastic Phone Case

Characteristics Values
Remove phone from case
Separate plastic and silicon components
Mix warm water and soap 1 cup of water, 1 drop of soap (or detergent/liquid castile soap/hand soap)
Clean with a toothbrush, rag, or sponge Avoid using a toothbrush on wood or leather
Rinse off soapy water
Dry with a microfiber cloth
Leave to air dry for an hour

shunpoly

Use soap and water

To clean a plastic phone case with soap and water, start by removing your phone from the case. Mix a solution of soap and water in a bowl. Use warm water and avoid boiling water, which may affect the case's material or shape. For plastic cases, use a drop of dish soap, as too much soap will make the mixture overly sudsy. If you don't have dish soap, you can use laundry detergent, liquid castile soap, or hand soap. Stir the solution thoroughly with a spoon.

Next, use a cleaning tool to apply the soap and water solution to the case. A toothbrush can be used for plastic cases, but avoid using a brush on wood or leather. Instead, use a soft cloth or sponge for these materials. Dip your chosen cleaning tool into the solution and gently scrub the phone case in a back-and-forth or circular motion. Make sure to clean both the outside and inside of the case, paying extra attention to hard-to-reach nooks and crannies.

After scrubbing the case, rinse off any soapy residue with clean water. Use a soft, microfiber cloth to dry the case and ensure no water droplets are left on the case, as this could damage your phone. Leave the case to air-dry for at least an hour before putting your phone back in its clean case.

You can use soap and water to clean your plastic phone case whenever it looks dirty or stained. Regular cleaning will help maintain the appearance and longevity of your phone case.

shunpoly

Disinfect regularly

It is important to regularly disinfect your phone case, especially if your phone is often exposed to places where it can become contaminated. Disinfecting your phone case at least once a week is a good habit to get into. If you are using a leather case, consider switching to a material that is easier to clean and disinfect, such as silicone, rubber, or plastic.

To disinfect your plastic phone case, start by removing your phone from the case. Mix warm water and a drop of soap in a bowl. You can use dish soap, laundry detergent, liquid castile soap, or hand soap. Avoid using too much soap, as this will make your mixture overly sudsy. If you are using a toothbrush to scrub your case, roll it around in the solution to ensure the bristles are sufficiently wet. If you are using a rag or sponge, wet it with the soapy water and wring it out as much as possible before applying it to the phone case.

Scrub the case in a back-and-forth or circular motion, making sure to get into all the nooks and crannies on the inside and outside of the case. Avoid scrubbing too vigorously, especially if your case has paint or dye in the material, as this can cause the colour to come off. Once you have finished scrubbing, rinse the case thoroughly with water to remove any remaining soap.

Finally, dry the case with a soft, microfiber cloth to prevent scratches. Leave the case to air-dry for at least an hour before putting your phone back in.

shunpoly

Dry thoroughly

Drying your plastic phone case thoroughly is crucial to prevent moisture damage to your phone and its ports. It is recommended to let the case air dry for about 30 minutes to an hour in a dry, well-ventilated area. You can also use a microfiber cloth to wipe down the case and absorb any remaining droplets. Make sure to remove all excess water and moisture to avoid trapping any leftover liquid in the small parts of your case, which could lead to mold and further moisture damage. Do not use a hairdryer as the high heat could damage the structure of your case.

If you are using rubbing alcohol to clean your phone case, it is important to ensure that it has completely evaporated before placing the case back on your phone. Rubbing alcohol dries faster than water, but it is still important to let the case dry for a while to protect your phone from moisture damage.

For clear plastic phone cases, you can also try soaking the case in a borax or baking soda solution for an hour to break up dirt particles. After removing the case from the solution, dry it thoroughly with a soft cloth.

Drying your phone case thoroughly and regularly cleaning it will help maintain a hygienic and well-functioning device.

shunpoly

Remove phone first

Before you start cleaning your plastic phone case, it is important to remove your phone from the case. This may seem obvious, but it is an easy step to overlook. You don't want to forget and end up accidentally getting your phone wet or damaging it.

Once you've removed your phone, it's a good idea to separate the plastic case from any other components, such as a silicone or rubber insert, to ensure you're just cleaning the plastic. Then, mix a solution of warm water and soap. You can use dish soap, laundry detergent, liquid castile soap, or hand soap. Just be careful not to use too much soap, as this can create excess suds. If you're using a bowl, one drop of soap is usually enough. Stir the solution thoroughly with a spoon to combine the soap and water.

Now that you have your soap and water solution, you can choose your cleaning tool. A toothbrush is a good option for plastic cases, but make sure to wet the bristles sufficiently before starting. If you're concerned about scratching, you can opt for a softer tool, such as a sponge or a rag. If you go for a rag, a microfiber cloth is a good choice as it is lint-free and won't leave streaks. Avoid using brushes or bristles on bamboo cases, as these can cause scratches.

With your tools and solution ready, it's time to start cleaning. Dip your chosen tool into the solution and scrub the plastic case gently. Be sure to clean both the outside and the inside of the case, paying extra attention to any nooks and crannies that may be harbouring dirt or grime. Avoid scrubbing too vigorously, especially if your case has paint or dye, as this can cause the colour to come off.

shunpoly

Use a soft cloth

Using a soft cloth is an important part of cleaning your plastic phone case. It is recommended to use a soft cloth when drying your phone case after washing, to avoid scratches. Microfiber cloths are particularly good for this purpose.

Firstly, ensure you have removed your phone from its case. Then, mix a gentle hand soap or washing-up liquid with some warm water. Do not use boiling water, as this may damage your case. Dip your soft cloth into the soapy water and gently wipe down your phone case.

If you are removing stubborn stains, you may wish to use a sponge or old toothbrush to scrub the case. You can also use baking soda as a stain remover. Simply make a paste with water and apply it to your case with a soft-bristled toothbrush. However, be cautious when using baking soda on plastic, as it can cause scratches on softer surfaces.

Once you have finished scrubbing your case, rinse it with water and dry it with a lint-free soft cloth. Make sure your case is completely dry before putting it back on your phone.

Frequently asked questions

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment