Omar Khalid
The LG G7 ThinQ is a smartphone released by LG. The back cover of the LG G7 ThinQ is made of glass. The back cover is glued on strongly, and a hairdryer or heat gun can be used to heat and remove it. There are also plastic cases available for the LG G7 ThinQ, which are lightweight and slim.
| Characteristics | Values |
|---|---|
| Back cover material | Glass |
| Ease of repair | Difficult due to strong adhesive |
| Power button location | Right side of the phone |
| Protective film | Not recommended for the LCD's proximity sensor |
| Weight | Lightweight |
| Back cover removal tools | iPlastix, iFlex, heat gun, hairdryer, suction cup |
Explore related products
What You'll Learn
- The back cover is glued on strongly, requiring a heat gun or hairdryer to remove
- The back cover can be replaced with a glass or plastic version
- iPlastix is a plastic tool that can be used to separate the back cover without scratching the device
- iFlex is a thin, stable metal tool that can be used but may scratch the device
- There are plastic cases available for the LG G7 ThinQ
The back cover is glued on strongly, requiring a heat gun or hairdryer to remove
The back cover of the LG G7 ThinQ is glued on very strongly, so removing it can be a difficult process. It is important to take your time and be patient. Before beginning, ensure you have a clean work surface and make a backup of your device.
To remove the back cover, you will need to heat the device evenly with hot air to soften the glue. A heat gun is recommended for this purpose, but in most cases, a hairdryer can also be used. The ideal temperature range is 60–80 °C. You should still be able to touch the device comfortably at this temperature.
Once the glue is softened, use a flat and flexible tool, such as the iPlastix or iFlex, to carefully separate the back cover from the frame. The iPlastix is made of plastic, so it won't scratch the device, but it can be tricky to insert. The iFlex, made of thin, stable metal, is easier to insert but can scratch the device's frame. If you can't find a place to insert your tool, use a suction cup to lift the glass.
After inserting the tool, stick a pick into the gap to keep it open. Then, run the tool around the entire edge to gradually loosen the glue. Heat and apply picks one by one to each section until the rear glass is unglued, and then lift it off. The whole process may take around half an hour.
Storing Your Greenhouse Plastic: Efficient Ways to Keep it Safe
You may want to see also
Explore related products
The back cover can be replaced with a glass or plastic version
The back cover of the LG G7 ThinQ is glued on strongly, making it difficult to replace. However, with the right tools and careful execution, it is possible to replace the back cover with a glass or plastic version.
To remove the original back cover, heat the device evenly with hot air to soften the glue. A temperature of 60-80°C should be sufficient, and you should still be able to touch the device without it feeling uncomfortably hot. Use a flat and flexible tool, such as the iPlastix or iFlex, to gradually loosen the glue by running it around the entire edge of the back cover. The iPlastix is made of plastic and won't scratch the device, but it can be tricky to insert. Alternatively, the iFlex is made of thin, stable metal, which makes it easier to insert but also increases the risk of scratching the frame.
Once you have inserted your tool of choice, stick a pick into the gap to keep it open. Then, heat and insert additional picks one by one to gradually loosen the glue. With the right tools and careful execution, you can successfully remove the original back cover.
After removing the original back cover, you can replace it with a glass or plastic version. Glass options are available on Amazon, such as the G7 Back Glass for LG G7 ThinQ, which includes a rear battery door replacement and a repair toolkit. Plastic options are also available, such as the Arkour Compatible case, which is ultra-thin, lightweight, and made of hard plastic.
When replacing the back cover, ensure that you follow the instructions carefully and take your time to avoid damaging your device.
Recycling Plastic: Is It Safe for Health?
You may want to see also
Explore related products
iPlastix is a plastic tool that can be used to separate the back cover without scratching the device
The LG G7 ThinQ has a back cover that is glued on strongly, making repairs difficult. To separate the back cover without scratching the device, you can use the iPlastix Opening Tool. This plastic tool is designed to slip into the tight gaps of modern electronic devices. Its super-tough plastic blade features a smart tip design, allowing it to get into smaller gaps without scratching or damaging your device.
The iPlastix is made of flexible, sturdy plastic, making it ideal for delicate tasks such as separating glued-down batteries and curved glass displays. Its soft and durable plastic construction ensures that it won't scratch the device, providing a safer alternative to metal tools. The iPlastix is thin enough to fit into tight spaces, such as the gap between the glass and the frame, without causing damage.
When removing the back cover of the LG G7 ThinQ, it is recommended to heat the device evenly with hot air to soften the glue. A temperature range of 60-80°C is suggested, ensuring that the device remains comfortably touchable. Once the glue is softened, the iPlastix can be inserted to separate the back cover. Its plastic composition prevents scratching, making it safer than metal tools that can scratch paint or other materials.
The iPlastix is a versatile tool that can be used on various devices, including smartphones and tablets. Its handle features a no-slip grip, providing a secure hold during use. The iPlastix is designed to minimise damage to devices, making it a valuable tool for both professionals and individuals performing DIY repairs. By using the iPlastix, you can confidently separate the back cover of the LG G7 ThinQ without worrying about scratches or other types of damage.
Converting Plastic to Diesel: A Sustainable Fuel Solution
You may want to see also
Explore related products
iFlex is a thin, stable metal tool that can be used but may scratch the device
The LG G7 ThinQ has a back cover that is glued on strongly, making repairs more difficult. To remove the back cover, you will need to use a flat and flexible tool to unstick the cover from the chassis. While the iPlastix tool is made of plastic and will not scratch the device, it can be tricky to insert due to its softness.
On the other hand, the iFlex tool is made of very thin and stable metal, which makes it easier to insert into the gap between the glass and the frame. However, because of its metal construction, the iFlex tool also makes it easier to scratch the frame of your device. Therefore, extra care must be taken when using the iFlex tool to avoid scratching or breaking the back cover.
It is recommended to heat the device evenly with hot air to soften the glue before attempting to remove the back cover. A temperature of 60-80°C should be sufficient, but ensure that the device is not too hot to touch. Once the glue is softened, you can use the iFlex tool to separate the back cover from the frame. Start by heating the spot where you intend to insert the tool and then place the flat tool between the back cover and the frame.
If you are unable to find a suitable place to insert the iFlex tool, you can use a suction cup to lift the glass. Alternatively, the iSclack tool can be used to easily lift the back cover, after which a flat tool can be used to loosen the glue. By taking your time and working carefully, you can successfully remove the back cover of the LG G7 ThinQ without causing any damage to the device.
Bleaching Yellowed Plastic Cards: Effective Methods
You may want to see also
Explore related products
![[3-PACK] Designed For LG G7 ThinQ [Tempered Glass] Screen Protector [Japan Glass With 9H Hardness] with Lifetime Replacement](https://m.media-amazon.com/images/I/51IALdfumRL._AC_UY218_.jpg)
There are plastic cases available for the LG G7 ThinQ
There are a variety of plastic cases available for the LG G7 ThinQ. These cases are designed to protect your smartphone from scratches, bumps, and drops, while also providing a comfortable and secure grip. Here are some options:
- The KAESAR PROTECTIVE case offers drop protection with its sleek, slim-fit, and durable design. It is made of dual-layer shockproof material and features a cute colourful silicone skin cover.
- The Spigen case combines flexibility and durability with its TPU construction. It features air cushioning and raised lips to protect your phone from damage and has ridged material at the top and bottom for a secure grip.
- Speck's Presidio Grip case features rubberized ridges on the back, providing friction to prevent your phone from slipping out of your hand. It also has Impactium material, a band of ridges inside the case, to disperse impact and safeguard your device.
- The Venoro case offers 360-degree protection for the LG G7 ThinQ with its dual-layer construction, making it ideal for outdoor activities and accidental drops.
- The Tech21 Evo Check case provides three layers of protection and is slim and light. It features Tech21's FlexShock material, which absorbs and distributes shock and energy from drops of up to 12 feet.
These cases offer a range of features, colours, and designs to suit your preferences and protect your LG G7 ThinQ smartphone.
The Autoimmune-Nanoplastics Link: A Health Crisis?
You may want to see also
Frequently asked questions
No, the back of the LG G7 ThinQ is made of glass.
The back cover is glued on strongly, so you will need to heat the device evenly with hot air to soften the glue. A temperature of 60-80°C should be sufficient. You can then use a flat and flexible tool, such as the iPlastix or iFlex, to remove the back cover.
The iPlastix is a flat and flexible tool made of plastic, so it won't scratch the device. However, it is very soft and tricky to insert.
Yes, there are plastic cases available for the LG G7 ThinQ. For example, Amazon offers a blue matte texture hard plastic slim cover for the device.
![Compatible for LG G7 / LG G7 ThinQ / LG G7 Plus Case 360° Rotatable Ring Holder Kickstand/Stand [Non Yellowing] Transparent 4 Corners Shockproof Military-Grade Protective Cover Case - Crystal Clear](https://m.media-amazon.com/images/I/61ytPQCZs9L._AC_UY218_.jpg)
