Chloe Zhang
Privateer Press is a company that produces tabletop wargames, including Warmachine, Hordes, and Grind. The games are played with white metal, plastic, and resin miniatures. The plastic used by Privateer Press has been the subject of some criticism, with some users reporting issues with warping, discoloration, and weakening of the plastic over time. The company has also been criticized for poor mould line placement, which can be difficult to clean and can affect the overall detail of the miniatures. Privateer Press has started to transition to polystyrene plastic, similar to that used by Games Workshop, which is considered to be of better quality.
| Characteristics | Values |
|---|---|
| Plastic Type | PVC, Resin, Polystyrene |
| Plastic Quality | Inconsistent, issues with warping, discoloration, weakening, and mould lines |
| Recommended Glue | Super Glue, Zap-A-Gap Glue, Poly Cement |
Explore related products
What You'll Learn
PVC plastic is used in Privateer Press kits
Privateer Press uses PVC plastic in some of its kits, such as the Convergence of Cyriss faction kits. PVC is used due to its low cost, but it has been criticised for its poor quality. The plastic is soft and prone to warping, especially in kits with thin parts like spears and swords. It is also susceptible to discoloration and weakening over time.
PVC kits from Privateer Press are sprueless, which makes them distinct from polystyrene plastic kits. The company has received criticism for its use of PVC, with some customers expressing a preference for polystyrene or resin models.
Privateer Press has released some kits in polystyrene plastic, such as the Convergence of Cyriss battle engine and two Khador warjack kits. Polystyrene is considered a higher-quality material for miniatures and is used by other companies like Games Workshop.
The company has also used resin for its miniatures, which is generally well-regarded by customers. Metal miniatures are also produced by Privateer Press and are considered by some to be of better quality than plastic models.
Overall, Privateer Press uses a variety of materials for its kits, including PVC, polystyrene, resin, and metal. While PVC has been criticised for its quality, Privateer Press continues to use it for certain kits, likely due to its cost-effectiveness.
Plastic Burning: Harming Our Planet and Health
You may want to see also
Explore related products
Polystyrene plastic is used in some Privateer Press kits
Privateer Press is a company that produces tabletop wargames, including Warmachine and Hordes. These games use plastic, resin, and metal miniatures.
While Privateer Press has used various types of plastic for its kits, there has been some criticism of the quality of their plastic models. Some users have reported issues with warping, discoloration, and weakening of the plastic over time, especially with older kits.
To address these concerns, Privateer Press has started transitioning to polystyrene plastic, similar to what is used by other wargame companies like Games Workshop (GW). Polystyrene is a hard plastic that is known for its durability and ability to hold fine details.
As of 2015 and 2016, Privateer Press had released a limited number of kits using polystyrene plastic, including the Convergence of Cyriss battle engine and two Khador warjack kits. These kits offer improved quality compared to their previous plastic offerings.
It is worth noting that Privateer Press continues to use other types of plastic, resin, and metal for their miniatures, and the choice of material may vary depending on the specific kit and model.
Plastic Currency: What's in Your Wallet?
You may want to see also
Explore related products
Plastic cement does not work on Privateer Press resin models
Privateer Press is a company that produces tabletop wargames, including Warmachine and Hordes, which use plastic, resin, and metal miniatures. While Privateer Press has released some kits made of polystyrene plastic, most of their plastic models are made of resin.
Resin is a type of plastic that is different from the typical hard plastic used in many miniatures. It is softer and more flexible, which allows for more intricate details and bends in the model. However, this also means that traditional plastic cement does not work on these models. Plastic cement is designed to melt and fuse hard plastic together, but it does not have the same effect on resin. Instead, resin models often require super glue or other types of adhesives to assemble.
The use of resin in Privateer Press models has been a source of contention among players and hobbyists. Some people prefer resin models because they offer more flexibility in converting and customizing the miniatures. Additionally, resin models can be glued with super glue, which is easier to work with than plastic cement.
However, others have criticized the quality of Privateer Press's resin models. Common issues include warping of plastic parts, especially spears and swords, discoloration, and weakening of the plastic over time. Additionally, mold lines can run across important features of the model, such as faces, and the soft plastic can make it challenging to clean and file these lines without causing damage.
To address these issues, Privateer Press has been transitioning to using polystyrene plastic, similar to that used by other miniature companies like Games Workshop. Polystyrene is a harder plastic that is less prone to warping and can be glued using plastic cement. However, as of 2016, only a handful of kits, such as the Convergence of Cyriss battle engine and some Khador warjack kits, were made from this material.
The Beauty of Vintage Flower Plastic Realism
You may want to see also
Explore related products
Plastic glue does not work on Privateer Press models
Privateer Press is a well-known gaming company that manufactures miniatures and models. The company uses different types of plastics for its models, including PVC, resin, and polystyrene plastic.
Plastic glue, also known as plastic cement, does not work on most Privateer Press models. This is because plastic glue is designed to work on hard plastics, and most Privateer Press models are made from softer plastics or resins. Plastic glue works by melting the plastic slightly and fusing the pieces together, but this chemical reaction does not work on all types of plastic. Therefore, it is not effective for gluing Privateer Press models made from PVC or resin.
Privateer Press recommends using super glue for their models, as it works well on a variety of materials, including metal, resin, and plastic. Super glue is a versatile adhesive that can be used for assembling miniatures and models from various materials. It forms a strong and permanent bond, making it ideal for joining plastic miniature parts. Additionally, super glue is easy to use and convenient, as it works across different materials, eliminating the need for multiple types of adhesives.
While plastic cement does not work on Privateer Press models made from resin or PVC, it can be used on their newer kits made from polystyrene plastic. Polystyrene is a type of hard plastic that is compatible with plastic cement. However, Privateer Press has released only a handful of kits in polystyrene, such as the Convergence of Cyriss battle engine and some Khador warjack kits.
In summary, plastic glue is not generally recommended for Privateer Press models. Instead, super glue is the preferred adhesive due to its versatility, strength, and ease of use. For Privateer Press kits made from polystyrene plastic, plastic cement can be used effectively, but these kits are less common compared to those made from other types of plastic and resin.
Turkey Hock Locks: Plastic Safety Solution
You may want to see also
Explore related products
Privateer Press's plastic models have issues with warping
Privateer Press's plastic models have been reported to have issues with warping. This issue is attributed to the company's decision to cut the plastic kits off the sprue before shipping, which can cause the plastic to warp. Additionally, the plastic used by Privateer Press has a low melting point, making it susceptible to warping if exposed to heat. This can be a problem for thin pieces such as swords and spears, which can droop on hot days or if left in a hot car.
The warping issue is not limited to older kits, but it is more pronounced in them due to the plastic weakening and discolouring over time. It is recommended not to purchase older plastic kits that have been sitting on shelves for extended periods.
Privateer Press's plastic kits are made from resin, which is a type of plastic with a low melting point that can be easily reshaped using heat. While this makes the warping issue more manageable, as users can dip warped pieces in hot water and then cold water to reshape them, it is still a concern for some consumers.
The company has been transitioning to polystyrene plastic, similar to that used by GW, which may help to alleviate the warping issue. However, this transition is slow, and most of their kits continue to be made from resinous plastic.
In addition to warping, Privateer Press's plastic kits have also been criticised for their inconsistent quality, with some kits having missing parts or excessive flash and mould lines that can be difficult to clean. Despite these issues, the company is reported to be easy to work with regarding customer service and resolving problems.
Slow Cooker Hack: Plastic Liners for Easy Cleanup
You may want to see also
Frequently asked questions
Privateer Press uses PVC, resin, and polystyrene plastics.
Privateer Press's plastic models have been described as "very hit and miss". Some of the most common issues include warping, discoloration, and weakening of the plastic over time. The plastic is also said to not hold detail well, with mold lines running across important features like the faces of models.
Plastic cement does not work on Privateer Press's resin models. Superglue is recommended for resin and metal models. Privateer Press has recently started releasing kits in polystyrene plastic, which plastic cement does work on.
