Alexei Volkov
If you're looking to repair or replace the plastic body parts on your moped, there are a few options available to you. You can either purchase replacement parts online from retailers such as Amazon or Walmart, or you can attempt to repair the broken parts yourself using epoxy and fiberglass cloth. For those who are handy, a tutorial on the Moped Army website outlines the steps to repair plastic moped parts, including cleaning the part, using sandpaper to scuff the surface, applying epoxy, and then covering it with fiberglass cloth. If you're looking for a cover for your moped, there are also disposable clear plastic covers available for purchase online.
| Characteristics | Values |
|---|---|
| Online retailers | Amazon, eBay, Walmart |
| Types of cover | Waterproof, weatherproof, disposable, dust |
| Brands | Dowco, LFYSON, ANYVOLUME, FAVOMOTO, Bocarmo, West Lake, GSYUWIH, LuliKa, Willstar, Xiyztok |
| Moped models | 2016 Genuine Scooters Buddy 50, Yamaha, Harley-Davidson, Suzuki, Honda, Kawasaki |
| Repair methods | Epoxy, JB Weld SteelStik, sandpaper, fiberglass cloth |
Explore related products
What You'll Learn
Repairing broken plastic moped parts
If you're looking to repair broken plastic moped parts, there are a few methods you can try. Firstly, assess whether the parts are functional and durable enough to be worth repairing, rather than replacing. If you decide to repair them, you can try the following methods:
Epoxy and Fibreglass
One common method is to use a combination of epoxy and fibreglass to fix broken plastic moped parts. Here are the steps:
- Clean the broken part with a grease remover, such as brake parts cleaner, and let it dry.
- Use sandpaper to scuff the surface, creating a rough texture that will help the epoxy adhere better.
- Mix the epoxy according to the manufacturer's instructions. Use an index card as a mixing surface and cut strips of formica (or use a popsicle stick) as an applicator.
- Apply the epoxy to the broken area, ensuring it gets into any cracks or crevices.
- Cut pieces of fibreglass cloth and stick them onto the epoxy, using the applicator to push the cloth down and ensure it is fully saturated.
- If needed, add more epoxy over the top of the patch to help saturate it and fill in any dry spots.
- Let the epoxy cure completely before using the part.
Super Glue and Baking Powder
Another repair method involves using standard household super glue and baking powder. By layering powder over the glue, a heat-generating chemical reaction occurs, driving the glue into the broken openings and creating a strong bond. Be sure to work in a well-ventilated area and consider using a respirator to avoid inhaling toxic fumes.
Unsticking a Stubborn Plastic Cap: Quick and Easy Tricks
You may want to see also
Explore related products
Filling holes in plastic moped covers
If you're looking to repair plastic moped covers with holes, there are a few methods you can try. Firstly, assess the size of the hole you're dealing with. For smaller holes, a makeshift cement made of super glue and baking soda can be used to fill the gap. Simply layer the glue and baking soda until the hole is plugged, and let it cure for around 15 minutes.
For larger holes, you can use a plastic welder to melt new plastic into the gap. Alternatively, a mesh patch and two-part epoxy can be used to fill the hole. Here is a step-by-step guide:
Step 1: Clean the Surface
Start by cleaning the plastic surface with a suitable cleaner to remove any grease or grime. Ensure the area is completely dry before proceeding.
Step 2: Prepare the Surface
Use a chunk of sandpaper to roughen the surface around the hole. This will help the epoxy adhere better to the plastic.
Step 3: Prepare the Epoxy
Mix equal parts of the two-part epoxy together in a bucket or bowl. Put on disposable gloves to protect your skin. The epoxy will become thick and tacky, so use a formica strip or a similar applicator to spread it onto the plastic.
Step 4: Apply the Epoxy and Fibreglass
Spread a thin layer of epoxy onto one side of the hole, covering the entire surrounding area. Press a fibreglass patch onto the epoxy, ensuring the hole is centred. The fibreglass should be larger than the hole to guarantee coverage.
Step 5: Seal the Patch
Apply another layer of epoxy over the fibreglass, focusing on the area covering the hole. If needed, add more epoxy after it cures to fill in any dry spots or secure loose edges.
Other Options
If you're looking for a quick fix, spray foam can be used to fill holes in moped covers. It expands to fill gaps and can be sanded and painted once cured. However, it may not be suitable for areas of structural integrity. Additionally, you can find disposable clear plastic moped covers on Amazon, which can be used as a temporary solution to protect your moped from dust and rain.
Starbucks Holiday Cups: Microwave-Safe Plastic?
You may want to see also
Explore related products
Cleaning plastic moped parts
Regular cleaning of your moped's plastic parts is essential for maintaining its performance, appearance, and longevity. Dirt, mud, and debris can accumulate during rides, leading to discolouration, corrosion, and potential damage.
- Pre-rinse: Before applying any cleaning products, start by pre-rinsing your moped with water to remove loose dirt and debris. This helps prevent scratches during the cleaning process and makes the following steps more effective. Remember to place the moped on stands so both wheels are off the ground and ensure the engine and exhausts are cold before rinsing, as residual heat will quickly vaporize the water and cleaning compounds, leaving a tarnished residue.
- Apply cleaning solution: Create a soapy solution with warm water and a special motorcycle cleaner or a gentle detergent/specialized plastic cleaner. You can also use a dedicated cleaner for specific issues like baked-on insects, road tar, or chain lube. Apply the solution from front to back or top to bottom on the main bodywork and frame, using a sponge. For more delicate parts with nooks and crannies, use a medium-hard bristled brush, such as an old toothbrush or a small paintbrush.
- Scrub and rinse: Lightly agitate the cleaner with a brush or sponge. There is no need to scrub aggressively, as this will cause scratching. For stubborn stains, hold the sponge over the dirt for a minute or two to soften it, or use a mixture of baking soda and water. Rinse off the cleaning solution with water and repeat as needed until all dirt is removed.
- Dry: After cleaning, thoroughly dry the plastic parts with a microfiber cloth or allow them to air dry. This prevents water spots and ensures a streak-free finish.
- Polish: Use a chamois leather cloth or a specific polishing cloth to gently buff the plastic parts. This will add shine and remove any watermarks. Apply polish sparingly to the wheels, chain adjusters, and sprocket carriers, but never spray it directly onto the wheels—spray onto the cloth instead.
- Lubricate: Apply a lubricant to any moving parts, such as the chain, to ensure that any oils washed off during cleaning are reapplied.
By following these steps and maintaining a regular cleaning routine, you can keep your moped's plastic parts in top-notch condition, enhancing both its performance and appearance.
Thick Plastic Sheeting: Understanding 14 Mil Plastic Thickness
You may want to see also
Explore related products
Sandpapering plastic moped parts
If you're looking to repair plastic moped parts, you may need to sandpaper them to create a smooth finish and ensure that primer or paint sticks to the surface. You can use sandpaper or a dual-action sanding machine. The latter can save you time and effort. If you're sanding manually, it's recommended to use 400-grit sandpaper. Make sure to sand all the edges and corners of the plastic moped parts.
For the initial sanding, use sandpaper wrapped around a sanding block. This will help you identify the high and low points of the plastic surface and sand the edges and corners. This step must be done carefully if you want to achieve a glossy painted finish. Examine the plastic surface under a light to check for any high and low points.
Once you've finished sanding, remove all the dust from the plastic using a tack cloth. After cleaning, use an air blower to remove any dust in hard-to-reach places. If your plastic moped parts have paint on them, you'll need to remove the previous coat of paint before sanding, as new paint won't stick to another layer of paint. Primer also won't stick to a surface with an enamel layer. To remove spray paint from plastic, wear rubber gloves for protection and place the plastic part on a cardboard strip. Take a paper towel, soak it in a paint remover like xylene, and spread it on the plastic part. Repeat this process until the entire part is covered. Wait for at least 15-30 minutes, then check if the paint is starting to come off by removing the paper towel. Start rubbing the paint with the paper towel to remove it. If the paint doesn't come off easily, apply more paint remover and leave it for another 15-30 minutes.
If your plastic moped parts have oxidation, use a razor blade held perpendicular to the surface to scrape it away and uncover workable plastic. Be careful not to gouge the plastic. You will create scratches, but ensure that you're only removing the oxidation. After removing the oxidation, you can start sanding the plastic. Soak the sandpaper in water to keep the texture constant throughout the process. If you want to keep a panel flat, use a sanding block. Start with a lower grit sandpaper, such as 220 or 400, to remove oxidation and scratches, and then progress to higher grits like 600, 800, and 1000 for a smoother finish.
Keep in mind that repairing plastic moped parts may not result in a brand-new appearance. Restored plastic parts will likely show signs of restoration, even if they come close to an off-the-shelf finish.
Vinyl vs Plastic: What's the Difference?
You may want to see also
Explore related products
Buying moped covers online
There are a variety of options available for those looking to buy moped covers online. The first step is to decide what type of cover you need. Are you looking for a cover to protect your moped from the elements, or are you looking for a cover to repair plastic body parts?
If you are looking for a cover to protect your moped from the rain and dust, there are many disposable clear plastic moped covers available on Amazon. These covers are lightweight, easy to carry, and can protect your moped from dust and rain. They are designed to fit a variety of motorcycle brands, including Harley-Davidson, Yamaha, Suzuki, Honda, and Kawasaki. However, keep in mind that some reviews mention issues with sizing and receiving the wrong number of covers.
For those looking for a more durable option, Amazon and Walmart also offer waterproof and weatherproof motorcycle covers that can fit a range of motorcycle and scooter models. These covers often come with reinforced securing straps and offer protection from rain, snow, and sun. Prices for these covers can range from $13.49 to $88, depending on the specific product and features included.
On the other hand, if you are looking to repair broken plastic body parts on your moped, you may not need to buy a replacement cover. There are online tutorials that can guide you through the process of repairing and restoring functionality to broken plastic parts. This typically involves cleaning the part, using sandpaper to roughen the surface, and then applying epoxy and fiberglass to repair the damage. The epoxy and fiberglass can be purchased at stores like Wal-Mart, and you can use common household items like scissors and an index card during the repair process.
Whether you are looking for a cover to protect your moped from the weather or seeking to repair broken plastic body parts, there are a variety of options available online to meet your needs. By considering your specific requirements and reading reviews, you can make an informed decision about the best moped cover or repair solution for your situation.
Fishing Plastics for Panfish: Techniques and Tips
You may want to see also
Frequently asked questions
You can find plastic moped covers on Amazon, eBay, and Walmart.
Some products that offer plastic moped covers include FAVOMOTO, Bocarmo, West Lake, GSYUWIH, LuliKa, and LFYSON.
To repair a broken plastic cover on your moped, you can use epoxy and fiberglass cloth. First, clean the surface with a cleaner and sandpaper to create a rough texture for the epoxy to stick to. Next, mix the epoxy and apply it to the affected area. Then, cut and stick the fiberglass cloth over the epoxy, ensuring it is saturated. Finally, let it cure and add more epoxy if needed.
