Alexei Volkov
Glittering plastic Easter eggs is a fun and simple way to add some sparkle to your Easter celebrations. It's a great activity to do with children, and the results can be used as beautiful decorations. You can use a variety of methods to glitter your eggs, from dipping and sprinkling to coating with glue and Mod Podge. With some simple craft supplies, you can create bold, fun, and magical glitter eggs to impress your family and friends.
| Characteristics | Values |
|---|---|
| Materials | Glitter, Mod Podge, plastic Easter eggs, glue, paintbrush, plastic spoon, toothpick or skewer, spray mod podge acrylic sealer, Styrofoam plates or bowls, straight pins, wide-rimmed shallow plastic cups |
| Preparation | Cover half of the plastic Easter egg in Mod Podge or glue. |
| Application | Use a plastic spoon to cover the coated area of the egg with glitter. |
| Drying | Allow the glittered area to dry for about 10-15 minutes. |
| Second Coat | Paint Mod Podge or glue onto the second half of the egg and repeat the glitter application process. |
| Final Touches | Spray the eggs with a mod podge acrylic sealer to protect the glitter and ensure longevity. |
| Display | Glittered plastic Easter eggs can be used as decorations, centrepieces, or filled with treats. |
Explore related products
What You'll Learn
Prepare your plastic eggs
To prepare your plastic eggs for glittering, you will need to purchase dyeable plastic eggs. You can usually find these at Walmart or craft stores, especially around Easter time. If you are using plastic eggs that snap apart, you will need to glue them shut before you start glittering. If you want to be able to open and close the eggs, you can skip this step, but be aware that the glitter may not survive the squeezing required to open them.
Before you start glittering, you should prepare a space to let your eggs dry. You can use a paper plate or a similar surface. One suggestion is to use Styrofoam plates or bowls with straight pins pushed into them about half an inch apart to create a stand for the eggs to dry on. You can also use an empty egg carton for drying.
If you are glittering real eggs, you should wash and dry them before starting, as your mouth will touch the surface of the egg. Then, using a straight or safety pin, pierce the top and bottom of the egg. Make sure the bottom hole is larger than the top hole to allow the egg to drain fully. Once your hole has been created, place your egg over a bowl and blow forcefully through the small hole until the contents are drained and only the shell remains. Set aside and repeat this process for the number of eggs you will be using.
Microwaving Plastic To-Go Boxes: Safe or Not?
You may want to see also
Explore related products
Use glue or Mod Podge
Glittering plastic Easter eggs is a fun and simple craft activity that can be enjoyed by both kids and adults. To get started, you'll need plastic eggs, Mod Podge (glue), glitter, and a paintbrush. You can also use a plastic plate or a piece of napkin or tissue paper for added decoration.
Begin by preparing your workspace. It's recommended to work in a well-ventilated area, preferably outdoors, to reduce the mess and manage the glitter fallout. You can use a plastic plate or a disposable plate as a handy surface to rest your egg on between steps and to pour out the Mod Podge and glitter.
Now, it's time to apply the Mod Podge. Using a paintbrush, brush on a thin, even layer of Mod Podge to one side of the plastic egg. If you want to add some extra decoration, you can cut out small pieces of napkin or tissue paper with interesting patterns or colours and adhere them to the egg using Mod Podge. Gently press down all the edges of the napkin or tissue paper against the Mod Podge, using your finger, and smooth out any wrinkles. Remember to keep your finger coated in Mod Podge to prevent accidental tearing.
Once you've applied the Mod Podge and any decorative elements, it's time to add the glitter. You can do this in two ways: by dipping or sprinkling. For the dipping method, pour the glitter into a small container that can accommodate the size of your egg. Then, dip the Mod Podged side of the egg into the glitter and shake off the excess. For the sprinkling method, simply sprinkle the glitter directly onto the Mod Podged areas of the egg.
Let the first side dry completely before moving on to the other side of the egg. Repeat the process of applying Mod Podge and adding glitter. If you want to create shapes or patterns with your glitter, you can mask an area with vinyl before applying the glitter and remove it once the glitter is dry.
Finally, seal your glittered egg to prevent glitter fallout and ensure its longevity. Spray one side of the egg with Mod Podge acrylic spray and let it dry completely before spraying the other side. This step adds a shiny coat of protection and helps the glitter stay in place.
Molding Large Plastic Parts: Techniques and Best Practices
You may want to see also
Explore related products
Apply glitter
To apply glitter to a plastic Easter egg, you can use glue or Mod Podge. You can either dip the egg in glue and then sprinkle glitter on top, or you can paint the egg with glue or Mod Podge and then cover it with glitter.
If you are dipping the egg, fill a shallow cup with about 0.75 inches of glue. Dip the bottom half of the egg in the glue and turn it slightly to ensure it is fully coated. Lift the egg out and let any excess glue drip off, then twist the bottom of the egg in a cup of glitter. Use your fingers to sprinkle and pat extra glitter onto any sparse areas, and smooth out any clumps. Stand the egg upright in the cup until the glue is dry, then transfer it to a paper plate or similar surface to finish drying. Repeat the process for each shade of glitter you want to use.
If you are painting the egg with glue or Mod Podge, cover half of the egg with your chosen adhesive, then use a plastic spoon to cover the coated area with glitter. The glitter that doesn't stick will fall off and can be reused. Let the egg dry for about 10-15 minutes, then carefully paint the second half of the egg and finish covering it with glitter.
To get an even finish, stick a thin piece of washi tape around the egg before dipping or painting it with glue. Make sure the glue and glitter cover about half of the tape. Once the egg is dry, peel off the tape.
If you want to create a galaxy effect, start by gluing the egg shut if it comes apart. Make a blob of glue on the surface of the egg, then sprinkle that area with blue glitter. Allow it to dry, then add more glue with purple glitter around the centre of the blue blob. Finish the galaxy with darker pink glitter, and lighter pink if desired.
The Many Faces of Plastic: Exploring the Different Types
You may want to see also
Explore related products
Allow to dry
Allowing your glittered plastic Easter eggs to dry is a crucial step in the crafting process. The drying time ensures that the glitter adheres securely to the egg, creating a sparkly and translucent finish. Here are some detailed instructions for this stage:
Firstly, it is important to allow the glittered egg to air dry for approximately 10 to 15 minutes. During this time, the glitter will settle and bond with the adhesive coating, which could be Mod Podge, glue, or another suitable craft adhesive. This initial drying period allows the glitter to set and reduces the risk of smudging or smearing during the next steps.
Once the egg feels dry to the touch, carefully apply a second coat of your chosen adhesive to the remaining unglittered half of the egg. This step requires a gentle touch to avoid disturbing the glitter that has already been applied. Use a paintbrush or plastic spoon to evenly distribute the adhesive, ensuring that it does not drip or run onto the glittered areas.
After coating the second half of the egg, it's time to apply glitter to this section. Using a plastic spoon or your fingers, gently pat and smooth out the glitter until the entire half is covered. Take care not to touch or disturb the previously glittered area, as it may still be delicate. Once the second half is completely covered in glitter, set the egg aside and allow it to air dry again for a similar duration of 10 to 15 minutes.
While the second half of the egg is drying, you can begin preparing the drying setup for the final stage. This setup can vary depending on your preferences and available materials. One option is to use an empty egg carton, which provides a natural shape to hold the eggs securely during the final drying process. Alternatively, you can create a makeshift drying rack by pushing straight pins into a piece of Styrofoam, creating a bed for the eggs to rest on. This method ensures that the eggs are not disturbed and that all sides can dry evenly.
For the final drying stage, once the second half of the egg is dry to the touch, carefully transfer the egg to your chosen drying setup. If using an egg carton, place the egg securely in one of the compartments, ensuring it doesn't roll or shift. If using a makeshift drying rack, balance the egg on the pins so that it stands upright, allowing excess glitter to fall off and ensuring all sides are exposed to the air. Leave the eggs in their drying setup for several hours or until completely dry.
After completing the final drying stage, your glittered plastic Easter eggs should be fully adorned and ready for display or further decoration. The drying process is essential to ensure the glitter's longevity and reduce the chances of it flaking or falling off. With proper drying, your glittered eggs will be a beautiful and sparkly addition to your Easter celebrations.
Practice with Plastic: Better Golf?
You may want to see also
Explore related products
Seal with a spray
Once you've glittered your plastic Easter eggs, you'll want to seal the glitter in place with a spray sealer. There are a few things to keep in mind when it comes to this step.
First, make sure you are working in a well-ventilated area. Set up your workspace in a space like your garage, and spread out a drop cloth to protect the surrounding area from overspray. This is an important step to protect yourself from inhaling any fumes from the spray sealer.
Next, ensure that your plastic eggs are clean and completely dry before you begin spraying. Any moisture on the eggs could impact the adhesion of the sealer. It's also important to allow adequate time for the glitter to adhere to the glue or mod podge before you apply the sealer.
When you're ready to spray, use a light touch and apply a few light coats of sealer to the eggs. This will help ensure that you don't disturb the delicate glitter layer. Allow each coat to dry before applying the next.
Finally, let your eggs dry completely before handling them. This may take up to 24 hours. Once they're fully dry, your glittered eggs will be ready to display or use in your Easter celebrations.
BPA Plastics: Harmful Health Impact Revealed
You may want to see also
