Alexei Volkov
Plastic deer netting is an effective way to protect your crops and plants from deer and other small animals. The lightweight and durable netting is easy to install, only requiring fence posts and a few tools. Before installing the netting, it is important to check the maximum fence height allowed by your local zoning commission. To begin the installation process, place your corner posts and run string between them to ensure that your line posts are installed in a straight line. Posts should be spaced about 15 feet apart, with one-third of the post sunk underground to keep them sturdy. You can then attach the netting to the posts using zip ties or stainless steel wire, ensuring there are no gaps for deer to squeeze through.
Explore related products
What You'll Learn
Using cable ties, hog rings, and hog ring guns
Cable ties, hog rings, and hog ring guns are essential for installing plastic deer netting. Cable ties securely fasten the netting to posts, fences, or other structures, creating an impenetrable barrier that deters deer and protects your crops. They are designed to withstand outdoor elements and provide a neat and effective installation.
Hog rings are used to securely connect and reinforce the edges of the deer netting. They are perfect for joining multiple sections of the netting, ensuring there are no gaps or weak points. With hog rings, you can achieve a seamless and robust barrier, effectively keeping deer and other wildlife at bay.
Hog ring guns are designed for comfort and ease of use, allowing for efficient and consistent installation. They streamline the process of installing hog rings, making it quick and hassle-free.
To install plastic deer netting using cable ties, hog rings, and hog ring guns, follow these steps:
- Roll out a few feet of the fence on the outside of the enclosure.
- Use cable ties to attach the fence to the post, leaving 3-4 mesh blocks past the fence post.
- Fasten the top of the fence to the upper cable with a hog ring clip near the first post.
- Wrap the zip ties or hog ring clips around the post and one full grid of the deer fence.
- Connect the end of the fence into the fence using hog ring clips.
- Connect the fence using hog ring clips to the middle and bottom horizontal tension cables.
- Pull the bottom metal cable up and clip it 2-3 mesh grids up into the fence to stretch it tight and keep it close to the ground.
- Install ground stakes between each post spacing and in areas with uneven ground.
By following these steps and using cable ties, hog rings, and hog ring guns, you can securely install plastic deer netting, creating an effective barrier to protect your crops from deer and other wildlife.
How Plastic Tarps Help Dry Cordwood
You may want to see also
Explore related products
Setting up corner posts and string
First, determine the placement of your corner posts. For a vegetable garden, place the posts far enough away from the rows to allow easy access for tending crops and weeding. For ornamental beds, consider allowing space for plants to grow without poking through the netting. Remember, deer can jump as high as 8 feet, so your posts and netting should be at least 8 feet tall.
When installing the corner posts, it's essential to ensure they are sturdy. To achieve this, sink one-third of the post underground. This typically requires a post that is at least 12 feet long. If you're using wooden fence posts, soaking the ground with water first can make pounding the posts into heavy soil easier.
Once your corner posts are securely in place, it's time to run string between them. This string will act as a guide to ensure that your line posts are installed in a straight line. Stretch the string tightly between the corner posts, creating a reference line for the rest of your fence installation.
After setting up the corner posts and string, you can continue installing the line posts and netting. Remember to space the posts about 15 feet apart or closer together for an even sturdier fence. If you encounter any obstacles, such as buildings, you can attach the netting to them with staples and then continue on the other side.
By following these steps for setting up corner posts and string, you'll have a strong foundation for your plastic deer netting. This will help ensure the effectiveness of your fence in keeping deer and other small animals out of your garden or crop area.
Choosing the Right Greenhouse Plastic Size
You may want to see also
Explore related products
Securing the bottom with ground staples
Securing the bottom edge of the deer netting with ground staples is crucial to prevent small animals from slipping under the barrier. Ground staples are designed to anchor the netting firmly to the ground, ensuring that it remains in place even in various weather conditions.
To begin, lay out the deer netting along the ground, ensuring it is taut and free of any gaps that animals could squeeze through. Place the ground staples at regular intervals along the bottom edge of the netting, typically every few feet. Position the staples securely into the ground, following the manufacturer's instructions for the recommended depth.
The staples should be crafted from durable materials to withstand outdoor elements and keep the netting firmly in place. They are easy to install and provide a reliable solution to prevent unwanted intrusions from small animals. For added protection, consider using netting that is slightly longer than the height of your fence, allowing the excess netting to lay on the ground. This extra netting can then be staked to the ground with the ground staples, creating a secure barrier.
Additionally, when installing the deer netting, it is important to ensure that the posts are sturdy and securely anchored. Space the posts close together for a stronger fence, and consider soaking the ground with water first to ease the process of pounding the posts into heavy soil. By following these steps and securing the bottom edge with ground staples, you can effectively prevent small animals from accessing your garden or crops.
Grounding Plastic Water Pipes: A DIY Guide
You may want to see also
Explore related products
Attaching to fences, posts, or other structures
Attaching plastic deer netting to fences, posts, or other structures is a straightforward process, but it requires careful planning and the right tools. Here is a comprehensive guide to help you through the process:
First, determine the placement of your fence posts or support structures. Space the posts about 15 feet apart, or closer for a sturdier fence. For a gate, set a pair of posts 3 feet apart. If you're installing the fence in heavy soil, soaking the ground with water first will make pounding the posts in easier. It is recommended that you install the corner posts first and run string between them to ensure that the line posts are installed in a straight line.
Next, attach the deer netting to your first support structure. You can use zip ties or stainless steel wire to attach the netting to the post at 2-foot intervals from top to bottom. For a neat and secure finish, wrap the cut ends of the netting around the fence post. If you're attaching the netting to a new support, hammer it firmly into the ground, ensuring it goes to a depth of at least one foot. Deer can jump about 8 feet high, so install your posts and netting at least 8 feet tall, with one-third of the post sunk underground. This will require a post that is at least 12 feet long.
Now, stretch the netting around the outside of the posts, ensuring it is tight and secure with no gaps that deer could squeeze through. You can use cable ties to attach the netting to the posts, leaving 3-4 mesh blocks past the fence post. For extra protection, allow 6 inches of netting to lay on the ground on the outside of the enclosure, and stake it to the ground with garden staples every few feet. This will prevent deer and other small animals from crawling under the fence.
Finally, finish by making a gate. Roll the excess netting onto a one-by-two-inch piece of wood, 8 feet long, starting at the end of the netting. Stop rolling when you reach the height of the gate post and lash it securely with an easy-to-remove string. This will keep the netting vertical, and you will only need to lash at the bottom, midway up the post, and as high as you can reach.
The Impact of Burning Plastics on Our Ozone Layer
You may want to see also
Explore related products
Tying netting to gate posts
Planning and Preparation:
Before you begin, it is important to check with your local zoning commission for any regulations or restrictions on fence height. Many codes limit fence height to 6 feet, but there may be exceptions when dealing with damage-causing animals like deer.
Installing Corner Posts:
For effective deer management, it is recommended to use a deer netting kit that includes metal posts and sleeves. If you don't have a kit, you can use wooden fence posts instead. Install the corner posts first, ensuring they are sturdy and securely anchored. The recommended depth for sinking the posts into the ground is one-third of the total post length. For example, if you're installing 8-foot-tall netting, you'll need a 12-foot-long post.
String Guidance:
Once the corner posts are in place, run a string between them. This string will act as a guide to ensure that your line posts are installed in a straight line. Space the line posts about 15 feet apart, and for a sturdier fence, you can place them closer together. If you're installing the fence in heavy soil, soaking the ground with water first will make pounding the posts in easier.
Attaching the Netting:
Start by attaching the plastic deer netting to one of the gate posts. Use zip ties or stainless steel wire to securely attach the netting to the post at regular intervals of 2 feet from top to bottom. This will ensure that the netting is firmly attached and reduce the risk of sagging or gaps forming over time.
Extra Protection:
For added protection, opt for netting that is 8 feet 6 inches long. This will give you some extra length to lay on the ground outside the enclosure. Stake the netting to the ground with garden staples every few feet to prevent deer and other critters from crawling under the fence.
Finishing Touches:
After attaching the netting to the first gate post, stretch it around the outside of the remaining posts, ensuring it remains tight and secure. Finish by creating a gate. Roll the excess netting onto a one-by-two-inch piece of wood, 8 feet long, and lash it to the gate post with an easy-to-remove string. This will keep the netting vertical and secure, preventing deer from crashing into the fence.
By following these steps and using high-quality plastic deer netting, cable ties, and ground staples, you can effectively protect your crops and gardens from deer and other small animals.
Discharging Static Electricity: Plastic's Persistent Problem
You may want to see also
Frequently asked questions
Check with your local zoning commission for the maximum fence height allowed. Most codes limit fence height to 6 feet, but allow exceptions when damage-causing animals are involved. Deer can jump about 8 feet high, so install posts and netting at this height to be safe.
You will need plastic deer netting, cable ties, hog rings, hog ring guns, ground staples, and deer net monofilament. You may also need fence posts, zip ties, stainless steel wire, and garden staples.
Install the corner posts first and run string between them to act as a guide to ensure line posts are installed in a straight line. Space the posts about 15 feet apart or closer for a sturdier fence. Set one pair of posts 3 feet apart for a gate. For heavy soil, soak the ground with water first to make pounding posts in easier.
Attach the netting to each post, ensuring it is tight with no gaps for animals to squeeze through. Use zip ties or stainless steel wire to attach the netting to the post at 2-foot intervals from top to bottom.
Roll any excess netting onto a one-by-two-inch piece of wood 8 feet long, starting at the end of the netting. Lash it to the gate post with an easy-to-remove string. Tie brightly coloured flagging tape, about chest-high, around the netting to prevent deer from crashing into the fence.
