Sofia Martinez
Behr's new paint cans feature a simple pour lid and spout, which are designed to make opening, pouring, and storing paint easier than ever. The new lid can be removed in the same way as traditional paint lids, but it also has a smaller, 70mm opening and spout for easier pouring. The spout can be attached by first unscrewing the smaller circle cap counter-clockwise a 1/4 turn, and then screwing the spout in clockwise. After pouring the paint, the spout can be removed by turning it counter-clockwise and cleaned for next time. If you don't have the spout attachment, the entire lid can be removed with a screwdriver or paint can key, but be careful as pouring from the small hole without the spout can be messy.
| Characteristics | Values |
|---|---|
| Paint Lid Type | Simple Pour Lid |
| Paint Lid Material | Plastic |
| Paint Container Type | Can |
| Paint Container Material | Plastic |
| Paint Container Size | One-gallon cans |
| Paint Type | BEHR MARQUEE Interior and Exterior Paint & Primer |
| Opening Mechanism | Screw cap |
| Spout Attachment | Yes |
| Spout Attachment Mechanism | Screw clockwise 1/4 turn |
| Alternative Opening Mechanism | Paint key or screwdriver |
| Alternative Opening Method | Running lid under hot water |
| Alternative Opening Method | Using plastic wrap between the lid and container |
| Alternative Opening Method | Twisting with rubber gloves or a rubber band |
Explore related products
What You'll Learn
Using hot water to loosen the lid
If you are struggling to open a Behr plastic paint lid, hot water can be your best friend. This is a quick and easy way to loosen the lid and get to the paint without making a mess.
First, run the lid under hot water for about 30 seconds. The heat from the water will loosen any dry paint that has fused the lid shut. The hot water will also cause the metal lid to expand, which will help to loosen it from the glass jar.
If you are worried about making a mess, you can place a dish towel under the jar to catch any drips. You can also use a knife to help loosen the lid by inserting the blunt edge between the lid and the jar and gently prying it open.
Once the lid has been loosened by the hot water, you can try to gently twist it open with your hands. If you are having trouble getting a good grip, try using rubber gloves or a wide rubber band around the lid to provide additional traction and strength.
To prevent this problem in the future, remember to wipe off any excess paint from the rim of the jar and lid with a damp cloth before sealing the jar shut. You can also run a small amount of Vaseline or petroleum jelly along the bottom of the jar's grooves to deter any paint from fusing the lid shut.
Opening a Paint Bucket: Plastic Lid Hacks
You may want to see also
Explore related products
Using a rubber band or rubber gloves to open the lid
If you're struggling to open a Behr plastic paint lid, there are a few tricks you can try that use rubber bands or rubber gloves. These methods can help you open even the most stubborn lids.
One simple method is to use a rubber band. Wrap a strong rubber band snugly around the lid of the paint container. This will give you more grip and make it easier to open. You can also try wrapping a rubber band around both the jar and the lid for even more grip.
Alternatively, try using rubber gloves. The rubber helps to provide additional traction and gives you more strength when twisting off the lid. This method works on all sorts of containers, from mason jars to pop bottles.
If the paint has dried and fused the lid shut, there are a few other tricks you can try. Running the lid under hot water or placing the jar, lid first, into a bowl of hot water can help loosen the lid. You can also use a hairdryer to apply heat to the lid, which will expand it slightly and release its grip.
Transforming Your Plastic Shower: A Painting Guide
You may want to see also
Explore related products
$49.83
Using a screwdriver or paint can key to open the lid
If you're looking to open a Behr plastic paint lid, you can use a screwdriver or paint can key. This method is also useful for opening old and new cans of paint. Here's a step-by-step guide:
Firstly, if your paint can has metal clips around the top, use a flat-head screwdriver to remove them. Place the screwdriver into any gap between the clips and the can, then gently move the screwdriver handle up and down until they pop off.
Now, to open the lid itself, place the flat edge of the screwdriver under the lid, between the can and the lid. Push down gently to pry the lid, forcing it to pop slightly and release the seal. Repeat this process a few times around the lid until it can be easily lifted off. Remember, the screwdriver should not come into contact with wet paint.
If you don't have a screwdriver, you can use a paint can key, which can be useful to keep with your regular keys so you know where it is. Alternatively, you can use a paint can opener, putty knife, or anything with a flat edge to pry between the lid and the container.
If the lid is stuck, there are a few tricks you can try. Soak the can in warm water for 10 minutes, then try opening it with a screwdriver. You can also try leaving the can in direct sunlight for 10 minutes to soften the dried paint, or running the lid under hot water to loosen it. For future paint jobs, remember to wipe off any excess paint from the rim of the can and lid before resealing to prevent the lid from becoming stuck.
Plastic Paint on PVC: Does It Work?
You may want to see also
Explore related products
Using plastic wrap to prevent the lid from sticking
When it comes to preventing a sticky paint lid, plastic wrap can be a handy tool. This method is especially useful if you are dealing with a paint can that has been previously opened and the lid is now stuck tight. Start by grabbing a piece of plastic wrap that is slightly larger than the diameter of the paint can lid. Place the plastic wrap over the lid, ensuring that it covers the entire surface and that the edges are smooth and flat. Then, take a rubber mallet or a similar tool, and gently tap the plastic wrap around the edges of the lid. This will create a slight indentation on the plastic wrap, securing it in place. The plastic wrap creates a barrier, preventing the lid from sticking to the paint and making it easier to unscrew. When you are ready to use the paint again, simply remove the plastic wrap, and the lid should come off with ease. This method is simple, effective, and can save you a lot of time and effort when dealing with stubborn, stuck-on paint lids.
Additionally, you can also use plastic wrap as a preventive measure, even before you open a new can of paint. Before you break the seal on a new paint can, take some plastic wrap and cut a circle slightly larger than the lid. Again, ensure the edges are smooth, and then carefully place the plastic wrap over the lid, creating a barrier. This will help to prevent paint from drying and sticking around the edges of the lid, making it difficult to open in the future. With this method, you can ensure that the paint lid will be easy to remove, even if it has been stored for a long period.
For an extra layer of protection, you can also try using two layers of plastic wrap. After you have applied the first layer and secured it with a rubber mallet, add a second layer in the same way. This can be especially useful if you are dealing with a paint that is particularly prone to sticking or if the paint can has been stored in a place where the temperature fluctuates, which can cause condensation and paint to dry around the lid.
Remember, when using plastic wrap to prevent a sticky paint lid, always ensure that the plastic wrap is smooth and taut over the lid. Any wrinkles or creases in the plastic wrap can create spaces for paint to seep through and dry, defeating the purpose of this method. Taking a little extra time to ensure the plastic wrap is applied correctly can save you a lot of hassle in the long run.
Buffing Paint on Plastic: Achieving a Perfect Finish
You may want to see also
Explore related products
Opening the lid the old-school way
Behr's new paint cans have a simple pour lid and spout, which can be opened, poured, and stored with ease. However, if you don't have the spout attachment, you can always open the can the old-school way.
Firstly, make sure to clean any excess paint from the rim of the can and the lid with a damp cloth before sealing the can. This will prevent paint from drying and fusing the lid shut. If the lid is already stuck, try running it under hot water for about half a minute. The heat will help loosen the dried paint, and you can then try to open the lid.
Alternatively, you can use a flat-head screwdriver or a paint can key to open the lid. You can also try using rubber gloves or a wide rubber band for additional traction. Place a piece of plastic wrap over the opening of the paint container and then screw on the lid. Now, use a screwdriver or a similar tool to break the dry paint seal.
If you prefer a wider opening, you can remove the entire lid by turning it counter-clockwise with a paint key or screwdriver. Remember to always clean the rim and lid before resealing the can.
Removing Paint from Plastic Miniatures: Effective Techniques
You may want to see also
Frequently asked questions
Behr's new paint cans have a simple pour lid and spout. To open, first, unscrew the smaller circle cap counter-clockwise by a 1/4 turn. Then, attach the spout to the whole and screw in a clockwise direction.
Yes, you can open it using a flat-head screwdriver or paint can key, just like a regular paint can.
If the lid is stuck, try running it under hot water for about half a minute. The heat will help loosen the dry paint, and then it should screw off easily.
To prevent the lid from getting stuck, clean the rim of the can and the bottom of the lid of any excess paint before closing the can. You can also run a small amount of Vaseline or Petroleum Jelly along the bottom of the jar's grooves to prevent paint from fusing the lid shut.
