Ethan Clarke
The Nutribullet is a personal blender that is self-contained and easy to use. However, some users have reported issues with the plastic gear that attaches to the blade, with some saying that the plastic broke and they were unable to remove the old gear from the motor. Replacements for this plastic gear can be purchased on Amazon, and some users have reported that it is easy to install. This paragraph will discuss the process of replacing the plastic gear on a Nutribullet.
Characteristics and Values Table for Nutribullet Plastic Gear Replacement
| Characteristics | Values |
|---|---|
| Plastic Gear Replacement | 2 Top Base Gear (Plastic) Replacement Spare Parts |
| Compatible Models | Nutribullet 600/900, Nutribullet Pro & Classic |
| Installation | Remove old gear turning clockwise. New gear only needs to be finger-tightened. |
| Customer Reviews | Replacement part works well and is easy to install. |
| Additional Notes | Process may be fiddly and require specific tools and assistance from another person. |
Explore related products
What You'll Learn
Removing the base plate
To remove the base plate of your Nutribullet, you will need to remove four screws. Once the screws are removed, you can wiggle the plastic fan off the shaft of the screw head. It is worth noting that this screw head is soft metal and it can be difficult to get effective torque. Using pliers, grip the ribbed shaft while turning the plastic base gear.
The Nutribullet has a loosening direction arrow, which is opposite to the usual direction, so be careful not to turn it the wrong way. The mirror image videos can be confusing, so it is recommended to pay attention to the direction. Also, the shaft has a hole that can be used to turn it, making the process easier.
The base plate removal process is the same whether you are repairing or replacing your Nutribullet. It is a good idea to watch a YouTube video for a visual guide if you are unsure about any steps.
Removing the old gold centre part can be challenging as it tends to get stuck. You may need the right tools and possibly another person to assist you.
Aging Plastic Guitar Tuners: DIY Tricks for a Vintage Look
You may want to see also
Explore related products
Wiggling the plastic fan off the screw head
To replace the plastic gear in your Nutribullet, you will need to first remove the base plate. This can be done by removing the four screws that secure it in place. Once the base plate is removed, you can access the plastic fan attached to the screw head.
If the plastic fan is particularly stubborn, you may need to apply some additional techniques. One approach is to use a pair of pliers. Grip the ribbed shaft of the screw with the pliers while simultaneously turning the plastic base gear in the loosening direction. This will create the necessary torque to loosen the plastic fan. It is important to note that the loosening direction of the Nutribullet's screws may be opposite to what is usual, so take care to turn it in the correct direction to avoid further complications.
In some cases, the screw head may be stripped, making it more challenging to apply torque effectively. This can occur due to the large surface area of the plastic fan in contact with the screw head and the soft metal used in the Nutribullet's construction. If the screw head is stripped, it may be necessary to use a different tool, such as a power drill with a flat-head screwdriver attachment, to provide the required force to remove the plastic fan.
By carefully following these steps and applying the appropriate amount of force, you should be able to successfully wiggle the plastic fan off the screw head. This will allow you to access and replace the plastic gear in your Nutribullet. Remember to exercise caution and patience throughout the process to avoid causing any unintended damage to your appliance.
Curbell Plastics: AFO Straps and More
You may want to see also
Explore related products
Gripping the ribbed shaft with pliers
To replace the plastic gear on your Nutribullet, you will need to remove the base plate by unscrewing four screws. Once the base plate is off, you will be able to access the plastic fan attached to the ribbed shaft. Grip the ribbed shaft with pliers to hold it in place while you wiggle the plastic fan off the screw head. The plastic fan is likely to be tightly attached, so you may need to apply some force.
It is important to use the right type of pliers to get a good grip on the ribbed shaft. You may want to use adjustable pliers, which can be tightened until they clamp firmly around the shaft. Alternatively, you could use locking pliers, which lock into place, providing a strong grip. Using a cloth to hold the blade inside the Nutribullet can also help you get a better grip.
Once the plastic fan is removed, you will be able to access the plastic gear. To remove the old gear, turn it in a clockwise direction. You may need to use a screwdriver to prise it off. Before installing the new gear, check that it is the correct replacement part for your Nutribullet model. The new gear should be installed by tightening it with your fingers. The spinning motion of the blender will then self-tighten the gear when it is turned on.
Replacing the plastic gear on a Nutribullet can be a fiddly process, and it may be helpful to have someone assist you. Watching a YouTube tutorial can also be a good way to familiarise yourself with the process before you begin.
Easy Guide: Installing Your Resin Shed
You may want to see also
Explore related products
![[UPGRADE] Replacement Blender Blade Parts for 600w 900w NutriBullet Blender including Extractor Blade Gasket and Gear (2-pack)](https://m.media-amazon.com/images/I/71hyja3QsLL._AC_UL320_.jpg)
Buying replacement parts on Amazon
When it comes to buying replacement parts on Amazon, there are a few things to keep in mind. Firstly, Amazon offers a wide range of replacement parts for various products, including automotive, appliances, and electronics. In the case of the Nutribullet, you can find replacement parts on Amazon, specifically the plastic ring that surrounds the edge of the blade base.
To start your search, visit Amazon.com and hover over the "Replacement Parts" option in the dropdown menu. This will bring up several categories of replacement parts, including Automotive, Body & Trim, Brake System, Shocks, Struts & Suspension, and more. You can also use the search bar by typing in specific keywords such as "Nutribullet replacement parts" or "Nutribullet plastic gear."
Once you've navigated to the relevant section or found the desired product through the search bar, you can browse through the available options. Pay attention to the product descriptions, customer reviews, and ratings to make an informed decision about your purchase. Some products may even offer free shipping or discounts, so be sure to look out for those.
Before making your final purchase, be sure to compare prices and check the compatibility of the replacement part with your specific Nutribullet model. It is also advisable to verify the seller's reputation and return policy in case you need to make a return or exchange. Additionally, consider the shipping options and delivery times to ensure they align with your needs.
By following these steps and guidelines, you can confidently purchase replacement parts for your Nutribullet or any other product on Amazon, knowing that you have made a well-informed decision. Remember to refer to product details, customer feedback, and shipping information to ensure a smooth and satisfactory shopping experience.
A Quick Guide to Installing Plastic Ridge Vents
You may want to see also
Explore related products
Removing the old gear
To remove the old gear from your Nutribullet, start by removing the cup that contains the blades. You should then see a plastic circle with a nut in the centre that holds it to the motor. This plastic piece may be broken, and the nut may be extremely stuck, so you may need to use pliers to grip the ribbed shaft while turning the plastic base gear. You may also need to wiggle the plastic fan off the shaft of the screw head.
One user on iFixit recommends removing the base plate (which requires removing four screws) to get access to the inside of the Nutribullet. This may help you to grip the plastic fan or ribbed shaft with pliers.
Once you have removed the plastic gear, you can replace it with a new one. It is recommended to watch a YouTube video to help guide the replacement process, as it can be a bit fiddly and may require specific tools and an extra pair of hands.
Plastic's Impact: Greenhouse Gas Emissions and Climate Change
You may want to see also
Frequently asked questions
You can find replacement plastic gears for the Nutribullet 600/900 on Amazon.
First, remove the old gear by turning it clockwise. Then, install the new gear by hand-tightening it in an anti-clockwise direction. The spinning motion of the unit will self-tighten the gear.
You can replace parts such as the blades, cups, lids and accessories. These parts are compatible with all Nutribullet and Magic Bullet models.
Replacement parts for the Magic Bullet can be purchased on the Nutribullet website and Amazon.
The Nutribullet is a personal blender that is self-contained and simple to use. It includes an electric blender base with a number of attachments.
