Alexei Volkov
Plastic lawn edging is a great way to give your garden a neat and tidy look. It is flexible and easy to work with, making it perfect for curved borders and round garden beds. To replace Vigoro plastic lawn edging, first, measure the outline of the garden bed using rope or twine. Then, dig a trench around the garden bed, making sure it is deep enough so that the edging doesn't stick up out of the ground. Cut away any small roots that are in the way and place the edging into the trench, making sure the lip on the bottom points toward the garden bed. Finally, fill in the trench with soil and install edging stakes to secure the edging in place.
| Characteristics | Values |
|---|---|
| Purpose | To distinguish a garden bed from the lawn, making your garden look neat and tidy |
| Installation | Dig a trench around the garden bed, ensuring it's deep enough so the edging doesn't stick out of the ground. Cut away any roots interrupting the trench. Place the edging into the trench with the lip pointing toward the garden bed. Use connectors if the trench is longer than one roll of edging. |
| Measurement | Measure the outline of the garden bed using rope or twine. Trace the curvature with environmentally safe marking paint. Cut the rope to size and measure it with a tape measure to determine how much edging you'll need. Add 10% to the total length to account for waste. |
| Height | Typically ranges from 3-6 inches (7.6-15.2 cm) |
| Length | Commonly sold in 20-foot (6.1-meter) lengths |
| Preparation | Unroll the plastic lawn edging the day before installation. Remove any plastic coverings and leave it in the sun to make it easier to shape and use. |
Explore related products
![Landscape Edging 33FT,Garden Edging Borders [Extra Tall 4IN High] Flexible Lawn Edging Kit with 30pcs Stakes,Mini Plastic Fence for Landscaping Yard Flowerbeds,Grass-Black](https://m.media-amazon.com/images/I/616o5JwXoYL._AC_UL320_.jpg)
![50 FT Landscape Edging No Dig [Extra Tall 4 Inch High] with 45 Spikes, Heavy-Duty Plastic Garden Edging Border (Black, 50 FT) (Black, 50FT)](https://m.media-amazon.com/images/I/71WNFn0FfKL._AC_UL320_.jpg)
What You'll Learn
Planning and measuring the lawn
Planning and measuring your lawn for edging is a crucial step in ensuring a successful and aesthetically pleasing project. Here are some detailed instructions to help you through the process:
Planning the Lawn Edging Project:
Before you begin measuring and installing your new edging, it's essential to have a clear plan and understanding of the scope of the project. Decide on the specific areas of your lawn that require edging, such as the boundaries between the grass and garden beds, walkways, or slopes. Consider the functionality and aesthetics you want to achieve. For example, do you want a natural-looking border, a distinct separation, or a specific design element? Knowing your goals will guide your choice of materials and the overall installation process.
Measuring the Lawn:
Accurate measurements are vital to ensure you purchase enough edging material for your project. Here's a suggested process:
- Measure the outline of your garden bed or the area you want to edge: Use a piece of rope to outline the area, then measure the rope with a tape measure. This will give you the total linear feet or meters needed for your project.
- Account for the depth of the trench: Remember that you'll need to dig a trench that is deep enough to accommodate the plastic edging. Typically, a depth of 3-6 inches (7.6-15.2 cm) is recommended. Ensure your measurements account for this depth to prevent the edging from sticking up out of the ground.
- Plan for connectors: Plastic lawn edging is commonly sold in 20-foot (6.1-meter) lengths. If your trench is longer than one roll of edging, you'll need to use connectors. Each connector is 8 inches (20 cm) long, using 4 inches (10 cm) from each end of the edging. Plan and measure accordingly to know how many connectors you'll need.
- Choose the appropriate edging height: The height of plastic lawn edging can vary, typically ranging from 3-6 inches (7.6-15.2 cm). Consider your budget and availability, and long-term maintenance when choosing the height.
- Consider other features: If there are large tree roots along the trench, you may need to cut notches into the edging. Avoid areas with extensive large roots, as it will be challenging to cut the edging to accommodate them.
By following these planning and measuring steps, you'll be well-prepared to execute the installation of your new plastic lawn edging.
Boosting Plastic Stock Weight: Strategies and Techniques
You may want to see also
Explore related products
Preparing the plastic edging
Measure the Garden Bed
Start by measuring the outline of the garden bed where you plan to install the plastic edging. Use a piece of rope or twine and lay it out along the desired path. This will help you visualise the shape and length required. Once you're satisfied, use environmentally safe marking paint to trace the curvature of the rope. This will serve as your guide for digging the trench.
Determine the Amount of Edging Required
After the paint has dried, cut the rope to size and use a tape measure to determine its length. This measurement will help you understand how much plastic edging you need to purchase. Don't forget to add about 10% to the total length to account for waste and any potential errors.
Unroll the Plastic Edging
Before you begin installing, it's a good idea to unroll the plastic lawn edging and leave it flat on the ground a day before installation. This will allow the sun to warm the plastic, making it less curled and easier to shape and work with when placing it into the trench.
Prepare the Trench
Now, it's time to dig a trench along the marked outline of the garden bed. Use a round point shovel or spade to dig a trench that is 3-6 inches (7.6-15.2 cm) deep. Ensure that the trench is deep enough so that the plastic edging won't stick up out of the ground. If the edging is too high, it may be damaged by a lawnmower. Remove any small roots that interrupt the trench with pruning shears, but leave any large tree roots and cut the edging to accommodate them.
Place the Edging
Finally, place the plastic edging into the trench, ensuring that the lip on the bottom points toward the garden bed. Push the edging firmly against the garden bed and check that it feels sturdy all around. If needed, add more soil to low-lying spots to raise and support the edging.
Ultra-Strong Plastics: The Strongest Variants and Their Uses
You may want to see also
Explore related products
Digging a trench
When digging the trench, make sure to cut away any small roots that are in the way with pruning shears. For larger tree roots, it is preferable to cut a notch in the plastic edging to accommodate them rather than attempting to remove them. Once you have cleared away any roots and created a clear space to work with, you can begin shaping the trench.
The trench should be deep enough so that the plastic edging will not stick up out of the ground. If the edging is too high, it may be damaged by a lawnmower. It is also important to ensure that the trench is level and free of any debris before placing the edging.
Once the trench is dug, you can place the plastic edging inside, pushing it firmly into place and ensuring that the lip on the bottom points toward the garden bed. If your trench is longer than one roll of plastic edging, you will need to use a connector to join the pieces together. Simply slide the connector onto the end of each roll so that the ends meet in the middle, and push down firmly.
Building a Plastic Water Tank: A DIY Guide
You may want to see also
Explore related products
![LXS Landscape Edging No Dig [Extra 4 inch Tall] 33FT Garden Edging with 30 Spikes, Landscape Edging Border for Landscaping, Lawn, Flower Beds, Grass, Yard (4inch 33ft)](https://m.media-amazon.com/images/I/81uLirI6WTL._AC_UL320_.jpg)
Placing the edging
To place the edging, start by measuring the outline of the garden bed using rope. Lay out a piece of rope along the edges of the garden bed where you plan to install the edging. Once you're satisfied with the design, trace the curvature of the rope with environmentally safe marking paint. After the rope is dry, cut it to size and use a tape measure to determine the required length of edging for your project. Don't forget to add 10% to the total length to account for waste.
Next, prepare the trench. Dig a trench around the garden bed, following the marked line. The trench should be deep enough to accommodate the plastic edging, typically ranging from 3 to 6 inches (7.6 to 15.2 cm) deep. Ensure that you cut away any roots that interfere with the trench using pruning shears. Remove any plastic coverings or packaging from the edging and place it into the trench, pushing it firmly against the garden bed. Make sure the lip on the bottom of the edging points toward the garden bed rather than the lawn.
If you encounter large tree roots, it's better to cut a notch in the edging to accommodate them rather than removing the roots. Use scissors or a utility knife to create a gap, and line it up with the root. Avoid placing edging in areas with many large roots, as excessive cutting can compromise the integrity of the edging. If your trench is longer than one roll of edging, use a connector to join the ends securely.
Finally, install edging stakes to secure the edging in place. Lightly water the area with a garden hose to settle the soil and add more soil to any low-lying spots to raise the edging and ensure it feels sturdy all around.
Plastic Food Containers: Are They Safe?
You may want to see also
Explore related products
$35.24 $49.99
Securing the edging
To secure the edging, start by measuring the outline of the garden bed using rope. Lay out a piece of rope along the garden bed where you plan to install the edging, then use a tape measure to determine the required length of edging. Purchase enough edging to cover this length.
Before placing the edging, dig a trench around the garden bed, ensuring it is 3-6 inches deep. Cut away any small roots that interrupt the trench with pruning shears, but leave any large tree roots. If there are large roots, you can cut a notch in the edging and line it up with the root. Ensure the trench is deep enough so the edging doesn't stick up out of the ground, as this could cause damage when mowing the lawn.
Now, place the edging into the trench, ensuring the lip on the bottom points towards the garden bed. If the trench is longer than one roll of edging, use a connector to join the ends. Slide the connector onto the end of each roll so that the ends meet in the middle, and push down firmly.
Finally, fill the trench with soil to set the edging in place. Water the area lightly with a garden hose to settle the soil, and add more soil to any areas that need additional support.
The Dark Truth: Plastic Deodorant Sales
You may want to see also
Frequently asked questions
Measure the outline of the garden bed using rope. Lay the rope around the garden bed where the edging will be installed and then use a tape measure to determine how much edging you will need.
The trench should be 3-6 inches (7.6-15.2 cm) deep. Make sure the trench is deep enough so that the edging doesn't stick up out of the ground, otherwise, it could be damaged by a lawnmower.
Cut a notch in the plastic edging using scissors or a utility knife. Line up the gap with the root to check that you have the correct position.
Use a connector to join two rolls of edging. Slide the connector onto the end of each roll so that the ends meet in the middle and push down firmly.
Place the edging into the trench so that the lip on the bottom points towards the garden bed. Push the edging firmly against the garden bed and fill in the trench with soil. Install edging stakes to secure the edging in place.
