Maya Ellison
Jordan 1s are classic sneakers that can be laced in a variety of ways to achieve different looks. This article will discuss three unique ways to lace your Jordans with plastic to make them stand out. Whether you prefer a casual look or a more uniform style, read on to discover how to tie your Jordans with plastic for a fresh and trendy look.
| Characteristics | Values |
|---|---|
| Lacing pattern | Classic, bar, or loop-back |
| Threading technique | Alternating right and left laces through diagonal eyelets |
| Lace placement | Below each eyelet before pulling through for a uniform look |
| Eyelet spacing | Leave more eyelets empty for a looser fit or lace up all for a snug fit |
| Leftover lace | Tie into a bow, tuck inside, or leave out for a casual look |
| Adjustments | Tug on the tongue to loosen lacing and adjust tightness to prevent creasing |
| Lace length | Longer laces (72" for men, 63" for women) for loose lacing high-top Jordan 1s |
Explore related products
What You'll Learn
Threading the plastic laces through the eyelets
Now you're ready to begin the lacing pattern. Take the left plastic lace and pull it under and through the eyelet above and diagonal to it. Hold your index finger under the lace before pulling it through the eyelet to prevent creasing the tongue of your Jordan. Check that the lace is straight before crossing it to the other side, and be sure to position it below the eyelet.
Continue this pattern with the right plastic lace, alternating between the left and right laces as you work your way up the shoe. The right plastic lace will thread through the even eyelets, while the left lace will go through the odd eyelets. As you lace, be sure to maintain the same tension on both sides to ensure a symmetrical finish.
Depending on your preference and the style of your Jordans, you can leave the last two or four eyelets empty, or lace them all the way up for a snug fit. For high-top Jordan 1s, leaving the last four eyelets empty is a popular choice. Once you've reached your desired number of eyelets, you can move on to tying off the laces or tucking them in.
Easy Guide: Installing a Plastic Garage Sink
You may want to see also
Explore related products
$7.98 $8.98
Ensuring the laces are straight
Start with the Bottom Eyelets
Begin by threading the ends of the laces through the bottom eyelets. Push the end of each lace through the top of the bottom eyelets, with the left end through the bottom left eyelet and the right end through the bottom right eyelet. This creates a foundation for consistent lacing.
Check for Twists and Adjust
After threading the laces through the eyelets, pay attention to any twists or uneven lengths. If you notice any twists in the laces, straighten them out to achieve a flat, horizontal line across the shoe. Tug on the laces towards the centre to loosen them and make adjustments until they are equal in length.
Maintain Straight Lacing with Each Loop
As you continue lacing up the shoe, create loops by crossing the laces and threading them through the eyelets. With each loop, ensure the laces remain straight. Check that the loops are centred and positioned correctly before moving on to the next loop.
Alternate Threading for Consistency
When lacing up the shoe, alternate between threading the right and left laces through the eyelets. This helps maintain symmetry and ensures the laces go in the same direction. Check that the laces are straight before crossing them to the other side.
Avoid Overtightening
While it's important to tighten the laces slightly with each step for a neat appearance, be careful not to over-tighten them. Overtightening can cause discomfort and damage the shoe over time. Keep the laces slightly loose to allow for a comfortable fit and a more relaxed look.
By following these tips, you can ensure that your laces are straight when tying your Jordans with plastic, creating a polished and uniform finish.
Measuring Plastic Sheet Thickness: The Ultimate Guide
You may want to see also
Explore related products
Tying a bow with plastic laces
To tie a secure and neat bow with plastic laces, you can follow these steps for the Better Bow Shoelace Knot. This method creates a tight, closed knot with a double wrap around the middle.
Firstly, you need to create a starting knot, but be aware that tying it the wrong way will result in an unbalanced knot that will come undone easily. So, take care when creating the initial knot. Then, feed the left lace through the loop until a new loop emerges on the right side. Grab the lace and pull it through, and then pull on the loops to tighten the knot.
If you want to consume excess shoelace, you can repeat steps 5 and 6, wrapping the left end multiple times around the right loop. This will shorten one end, so if you want an even finish, start with uneven ends, making the end that begins on the right longer than the other.
This method creates a secure and symmetrical knot, which is ideal for Jordans or any other shoe with plastic laces.
Mineral Oil: Plastic's Friend or Foe?
You may want to see also
Explore related products
Hiding the knot under the tongue
Firstly, ensure that the laces are inserted into the eyelets from the outside in. This means that the laces should go from the outside to the inside of the shoe when threading them through the eyelets. This is important as it will ensure that the knot can be neatly tucked away under the tongue.
Once you have laced up your Jordans in your preferred style, it is time to tie the knot. You can do this by following the standard shoelace knot procedure. Cross the left lace over the right lace and then bring the right lace under and through the loop created by the left lace. Then, create a loop with the right lace and wrap the left lace around the back of this loop, bringing it forward and pushing it through the hole under the loop. Pull on both ends to tighten the knot.
Now, carefully tuck the knot underneath the tongue of your shoe. Make sure that the knot is tucked away neatly and is not visible from the outside. You can adjust the tightness of the knot to your preference, ensuring comfort. If you have removable insoles, you can also try tucking the knot under the insoles instead of the tongue. This method may be more comfortable for some, but it requires removable insoles, which are typically found in some sneakers but not in most dress shoes or boots.
If you don't have enough leftover lace to tie a knot, simply tuck the ends inside the shoe. You can also try using lace anchors to secure the ends instead of tying a knot, which is useful if you plan to slip your shoes on and off without untying them.
Finding Buried Plastic Well Pipes: Tips and Tricks
You may want to see also
Explore related products
Adjusting the tightness of the plastic laces
Adjusting the tightness of plastic laces on Jordans is a creative process that can make your sneakers truly your own. The right lacing method, combined with the correct size, ensures your Jordans fit true to size.
For wide feet, loosen the laces near the toe box and mid-foot to create extra space. Window lacing is a good technique for this, where you start with standard lacing for the bottom eyelets, then skip one or two pairs of eyelets in the middle to create a "window" before resuming lacing towards the top and tying securely. This method provides a relaxed fit without compromising support.
For narrow feet, tighten the laces evenly and secure them with a runner's loop. This is achieved by lacing up to the second-to-last eyelet using a crisscross pattern, then threading each lace through the adjacent eyelet to create a loop.
For a true-to-size fit, stick with the classic crisscross lacing method to maintain balanced pressure throughout the shoe.
It's important to avoid overtightening, as this can cause discomfort and damage the toe box over time. Similarly, skipping too many eyelets can reduce stability and affect the shoe's fit.
When lacing, ensure you have the right lace length, as incorrect lengths can make it difficult to tie securely or finish lacing properly. For Air Jordan 1s, lace lengths typically range from 54" to 72", depending on your preferred look and tightness.
You can also adjust the tightness of the hidden knot to your preference, ensuring comfort. This method involves inserting one lace end into the bottom eyelet from the outside to the inside of the shoe, leaving an equal length of lace on both sides. Then, take the left lace and insert it into the third eyelet on the right side, followed by the eyelet below, in a vertical direction. Repeat the pattern with the right lace and continue this process.
Additionally, you can loosen the laces by tugging them towards the centre of the shoe and making adjustments to ensure the loops are centred and the lace ends are even.
Plastic Rice: Is It Real?
You may want to see also
Frequently asked questions
Push the end of each lace through the top of the bottom 2 eyelets.
Hold your index finger under the right lace before pulling it through the eyelet. Your finger will prevent the lace from creasing the tongue as you pull.
Alternate threading the right and left laces by pulling the ends through the eyelets above and diagonal to them.
You can tie the remaining lace in a bow, or tuck the loose ends inside the shoe.
Tie the ends of the lace, tuck them into the tongue, or leave them out.
