Sofia Martinez
The MelGeek MOJO68 is a wireless mechanical keyboard with customizable keys and pre-lubed linear switches. It is compatible with Mac, Windows, and Linux systems and can be connected to a computer via Bluetooth, 2.4 GHz wireless dongle, or USB-C. The keyboard supports up to 8 devices and allows for easy switching between them. To connect the MelGeek MOJO68 to a computer, users should ensure they have the latest firmware version and follow the specific connection steps depending on the chosen connection mode.
| Characteristics | Values |
|---|---|
| Number of Keys | 68 |
| Connection Types | Bluetooth, 2.4 GHz, USB-C |
| Operating Systems | Mac, Windows, Linux |
| Keycaps | MDA profile |
| Software | MelGeek Hive |
| Polling Rate | <1ms (1000Hz) |
| Number of Devices | Up to 8 |
| Dongle Connection | Host USB |
Explore related products
What You'll Learn
Mojo68/Mojo84 2.4G mode reset and pairing
To reset and pair your Mojo68/Mojo84 keyboard in 2.4G mode, follow these steps:
- Connect the 2.4G dongle (2.4G receiver) to your computer, preferably to a host USB port.
- Switch to 2.4G mode. The keyboard should now start auto-pairing, and the indicator light will turn solid green when connected.
- If the indicator light flashes green, reset the 2.4G mode and try pairing again.
- Open KBTools with the 2.4G dongle still connected to your computer.
- In KBTools, change the USB device to MG-Dongle in the top right corner.
- Keep the keyboard in 2.4G mode and reset it by long-pressing BT+0 for about 3-5 seconds, until the 2.4G indicator light turns red.
- If the connection status still shows "disconnected," click "enable pairing" on the settings page of KBTools. The 2.4G indicator light should now be solid.
Note: It is recommended to update your Mojo68/Mojo84 firmware to the latest version before attempting to pair in 2.4G mode. Additionally, if you are a Windows user, ensure your system is updated to Windows 10 or higher, as Windows 7 does not support Bluetooth 5.0 and above.
Sterilizing Plastic Petri Dishes: Autoclave Settings and Techniques
You may want to see also
Explore related products
Bluetooth pairing for Mojo68/Mojo84
To connect the MelGeek Mojo68 or Mojo84 keyboard to your computer, you will need to use Bluetooth pairing. Here is a step-by-step guide on how to do this:
First, ensure that your Windows system is updated to Win10 or a more recent version, as Windows 7 does not support Bluetooth 5.0 and above. It is also recommended that you update your firmware to the latest version.
Next, switch your keyboard to Bluetooth mode. You will know that the keyboard is in pairing mode when the bottom left indicator flashes blue. Once the bottom left indicator stays lit in blue, this means that the keyboard has successfully paired with your device.
You can now easily switch between different devices by pressing the BT+number keys. Mojo68/Mojo84 supports up to 8 devices, including PCs, tablets, cell phones, and laptops. For example, to access the first channel, press BT+Q. To delete pairing information, long-press BT+number (1-8) for 3-5 seconds.
If you are having issues with Bluetooth pairing, you can also try connecting the keyboard using the 2.4G dongle. Simply connect the dongle to your computer's USB port and switch to 2.4G mode. The keyboard should then start auto-pairing, and the indicator light will stay green when connected.
The MelGeek Mojo68 is a compact, wireless mechanical keyboard that is compatible with various operating systems, including Mac, Windows, and Linux. It features customizable keys and hot-swappable pre-lubed linear switches, allowing users to adjust the sound and feel of the keyboard to their preferences.
Plastic Pollution: A Threat to Chesapeake Bay's Ecosystem
You may want to see also
Explore related products
Bluetooth pairing for MojoPad
To connect the Melgeek MojoPad to your computer, you will need to use Bluetooth pairing. Here is a step-by-step guide on how to do this:
First, ensure that your Windows system is updated to Win10 or a more recent version, as Windows 7 does not support Bluetooth 5.0 and above. It is also recommended that you update your firmware to the latest version.
Next, turn off the "Numlock" mode by pressing the "NUMLOCK" key, turning the MojoPad into "function mode". Then, long-press "FN+Numlock/÷/x/-" for 3-5 seconds to delete any previous pairing information. You should also delete the Bluetooth device information from your computer or laptop.
Now, you can put the MojoPad into pairing mode. Short-press "FN+Numlock/÷/x/-" until the indicator flashes blue. This means that the MojoPad is in pairing mode.
On your computer or laptop, search for the Bluetooth device "Mel Geek". Select this device to pair your MojoPad with your computer.
Once the MojoPad is connected, the bottom left indicator will stay blue. This means that Bluetooth pairing was successful.
You can now easily switch between different devices by simply pressing "FN+number keys". The MojoPad supports up to four devices, including PCs, tablets, cell phones, and laptops.
Toxic Plastic: Melting's Health Hazards
You may want to see also
Explore related products
![Anker Cable [2 Pack 6ft], USB A to USB C Cable for iPhone 17 Series,Samsung Galaxy S10 S10+, LG V30, Beats Fit Pro and More (Black).](https://m.media-amazon.com/images/I/71N7xhCJnoL._AC_UY218_.jpg)
Mojo68 wired mode
The Mojo68 keyboard can be used in wired mode with a USB connection. To connect the Mojo68 keyboard to a computer in wired mode, follow these steps:
- Connect the keyboard to the computer using a USB cable. A simple 2m USB-C cable is recommended by some users, as they have reported issues with longer coiled cables.
- Ensure that your firmware is up to date.
- If you are using the keyboard in full wired mode, disable sleep mode using kbtools.
- If you are using a 2.4G dongle, connect it to the host USB on your computer.
- Switch to 2.4G mode. The keyboard should start auto-pairing, and the indicator light will remain green when connected.
- If the indicator light flashes green, reset the 2.4G mode and pair the devices again.
- Open KBTools with the 2.4G dongle connected to your computer.
- Change the USB device to MG-Dongle on the top right of KBTools.
- Keep the keyboard in 2.4G mode and reset by long-pressing BT+0 for 3-5 seconds until the 2.4G indicator light turns red.
- If the "Connected State" is still "disconnected", click "enable pairing" on the setting page of KBTools.
The Mojo68 keyboard also supports Bluetooth and Wi-Fi modes and can be connected to up to 8 devices.
How Heavy is a 55-Gallon Plastic Drum?
You may want to see also
Explore related products
Mojo68/Mojo84 2.4G dongle pairing
To connect your MelGeek keyboard to your computer, you will need to use a USB cable. The Mojo68 keyboard is a wireless mechanical keyboard with customizable keys and pre-lubed linear switches. It is compatible with Mac, Windows, and Linux operating systems.
- Connect the 2.4G dongle to your computer, preferably to the host USB interface.
- Switch to 2.4G mode.
- The keyboard should now start auto-pairing, and the indicator light will turn green when connected.
- If the indicator light flashes green, reset the 2.4G mode and repeat the pairing process.
- Open KBTools with the 2.4G dongle still connected to your computer.
- Change the USB device to MG-Dongle in the top right corner of KBTools.
- Keep the keyboard in 2.4G mode and reset it by long-pressing BT+0 for 3-5 seconds until the indicator light turns red.
- If the connection status is still "disconnected," click "enable pairing" on the settings page of KBTools.
Mojo68/Mojo84 Bluetooth Pairing
If you are pairing your Mojo68/Mojo84 keyboard via Bluetooth, here are the steps:
- Ensure your Windows system is updated to Win10 or higher, as Windows 7 does not support Bluetooth 5.0 and above.
- Update your firmware to the latest version.
- Switch to Bluetooth Mode.
- When the bottom left indicator flashes blue, the keyboard is in Bluetooth pairing mode.
- Once the blue light stays on, the Bluetooth pairing is successful.
- You can switch between up to 8 devices (PC, tablet, cell phone, laptop) by pressing BT+number keys.
Fruit Roll-Ups: Plastic-Free or Plastic-Filled?
You may want to see also
Frequently asked questions
The MelGeek Mojo68 keyboard can be connected to your computer via Bluetooth, 2.4G wireless or wired connection. To connect via Bluetooth, switch to Bluetooth mode by pressing the FN+number keys. The bottom left indicator flashing blue means the keyboard is in pairing mode, and a solid blue light means pairing was successful. To connect via 2.4G wireless, connect the 2.4G dongle to your computer's USB port. The keyboard will start auto-pairing, and the indicator will be green when connected. For a wired connection, simply plug the keyboard into your computer using a USB-C cable.
When connecting via Bluetooth, a solid blue light on the bottom left indicator of your keyboard means that the pairing was successful. When connecting via 2.4G wireless, the indicator light will be solid green when connected.
The Mojo68 keyboard can connect to up to 8 devices.
No, the MelGeek Hive software can only be used when the Mojo68 is connected to a computer via USB.
The MelGeek Mojo68 keyboard is compatible with Mac, Windows and Linux operating systems.
