Maya Ellison
Milk crates are a versatile storage solution that can be hung on walls to save space and add a pop of colour. They can be easily installed with drywall anchors and big fat washers, which can be removed without ruining the wall. To hang plastic crates on your wall, you will need a drill, screws, washers, a screwdriver, and a level to ensure your crates are straight. First, use a drill to make indentations in the wall through the diamond cutouts at the back of the crate. Then, drill your screws into these indentations, leaving half an inch exposed. Place a washer on each screw and thread the crate onto them, tightening with a screwdriver. For extra strength, zip-tie the crates together and build your wall of storage.
Explore related products
What You'll Learn
Using drywall anchors and washers
To begin, select a plastic crate with built-in holes at the bottom, which will be positioned against the wall. Choose a spot on the wall where you want to hang the crate, ensuring it is level. Mark the wall by pushing screws into the wall hard enough to leave indentations, but not so hard that you puncture the drywall. Make sure the indentations are level and aligned with the holes in the crate.
The next step is to drill into the wall with a pilot bit through the bottom of the crate in two diagonal places. Thread washers onto screws so that they will catch the crate and hold it up. Screw the washers and screws into the anchors in the wall, pulling the crate snugly against the wall.
For added strength, you can zip-tie the crates together through their handles, creating a more unified unit. This technique ensures that your plastic crates are securely attached to the wall, providing functional and aesthetically pleasing storage solutions.
Coloring Plastic Animation Paper: A Beginner's Guide
You may want to see also
Explore related products
Drilling pilot holes at a diagonal
Select a plastic crate with built-in holes on the bottom, which will be positioned against the wall. Choose a spot on the wall where you want to hang the crate, ensuring it is level. Use a level tool to confirm that the crate will be straight. Mark the spots where you plan to drill the pilot holes.
Using a 1/8" to 1/4" pilot bit, drill through the open spaces at the bottom of the crate in two places, preferably at a diagonal to each other. Drilling at a diagonal angle adds strength and stability to the hanging crate. Make sure the holes are large enough to accommodate the screws you will use to hang the crate.
The diagonal drilling technique helps distribute the weight of the crate and its contents more evenly across the wall. It also reduces the likelihood of the crate pulling away from the wall or sagging over time. This method is particularly important if you plan to store heavier items in the crates.
After drilling the diagonal pilot holes, you can proceed with inserting washers and screws to secure the crate to the wall. Place a washer onto a screw, and thread it through the pilot hole. Ensure the washer is large enough to disperse the weight and hold the crate firmly in place. Tighten the screw with a screwdriver, anchoring the crate to the wall.
By following these steps and drilling pilot holes at a diagonal, you can confidently hang plastic crates on your wall, creating functional and aesthetically pleasing storage solutions. This method ensures the stability and durability of your wall-mounted crates.
Connecting ABS Plastic Drains: A Step-by-Step Guide
You may want to see also
Explore related products
Screws and anchors for heavy-duty storage
Screws and anchors are a great way to create heavy-duty storage solutions by hanging plastic crates on walls. This method can be used to hang milk crates, which are a versatile and modular storage option.
To begin, select a spot on the wall where you want to hang your crate. It is important to ensure that the crate is level. Use a level tool to confirm this. On the top side of the crate, closest to the ceiling, identify the two outermost diamond cutouts. Place one screw against the topmost point of one of the diamonds and push it into the wall, leaving an indentation. Repeat this process for the other diamond cutout. Make sure the screws are pushed in hard enough to leave a mark, but not so hard that they puncture the drywall.
The next step is to align the screws with the wall indentations and hammer them in. Drill the screws into the wall, leaving 1/2 inch exposed. For basic storage, two 1 1/2 inch screws should suffice. However, for heavy-duty storage, it is recommended to add a third screw for extra support.
Now, hold the milk crate up to the wall and attach a washer and a screw. The washer helps to distribute the weight and secure the crate in place. Thread the screw into the anchor halfway, and then tighten it with a screwdriver. Repeat this process for the remaining screws.
When selecting screws and anchors, it is important to choose heavy-duty options that can withstand significant weight. Toggler Snaptoggle BB Heavy-Duty Toggle Bolts are a popular choice, offering high weight capacity and a secure hold. EZ Ancor Toggle Lock Drywall Screws and Anchors are another heavy-duty option, rated to hold up to 100 pounds.
Plastic Bottles: Harming Our Planet, What Can We Do?
You may want to see also
Explore related products
Painting plastic crates to match decor
Plastic crates can be painted to match any decor and hung on walls for storage and decoration. To paint plastic crates to match your decor, you can follow these steps:
- Choose a paint colour that complements your existing decor. Consider whether you want a single colour or a two-tone effect, as seen on The Cooper Wives blog, where the outside of the crates were painted blue, leaving the inner sides nearly black.
- Clean the plastic crate thoroughly with soap and water, and use a water hose to spray and remove any soap residue. Allow the crate to dry completely.
- If the plastic surface is very smooth, use a super-fine grade of sandpaper or steel wool to lightly roughen the surface. Wipe off any residue.
- Apply a spray plastic primer. Valspar's clear plastic primer is recommended by The Creativity Exchange, with two thorough coats applied 15 minutes apart. Allow a full hour for the primer to dry.
- Once the primer is dry, you can apply the spray paint colour of your choice. Valspar's "Brilliant Metal" shiny steel/metallic spray paint is recommended for a silvery, zinc/steel look. Alternatively, you can use outdoor spray paint or spray paint designed for plastic.
- For added functionality, you can apply chalkboard paint for labelling. Three to four coats are recommended, allowing drying time between each coat.
Once your painted crates are dry, you can hang them on the wall using drywall anchors and washers. Drywall anchors are removable and do not require you to find a stud in the wall. Simply drill into the wall with a pilot bit through the open spaces in the bottom of the crate, and thread washers onto a screw so they catch the crate, hold it up, and screw into the anchors. For extra strength, you can zip-tie the crates together through the handles.
How Remoil Affects Plastic and Wood
You may want to see also
Explore related products
Using milk crates as shelves
Milk crates are a versatile storage solution that can be used to create shelves. They are modular, stack neatly, have built-in handles, and are made of strong, waterproof material. To use milk crates as shelves, follow these steps:
Choose a milk crate with built-in holes
Select a milk crate that has built-in holes on the bottom, which will become the back when mounted on the wall. These holes will be used to secure the crate to the wall.
Decide on a location
Choose a spot on the wall where you want to hang the milk crate shelf. Consider the height and placement that best suits your needs.
Gather the necessary hardware
You will need screws that are long enough to securely attach the milk crate to the wall. Drywall anchors and washers are also recommended to provide additional support and disperse the weight of the items placed on the shelf.
Prepare the wall
Use a level to ensure the milk crate is straight. Mark the wall through the outer holes of the milk crate with a pencil. These marks will guide your drilling.
Drill the holes
Drill into the marked spots on the wall with a drill bit slightly smaller than your screws. If using drywall anchors, drill holes that match the size of the anchors.
Attach the milk crate
Hold the milk crate up to the wall and insert the screws through the holes in the crate and into the drilled holes in the wall. Tighten the screws securely, using washers if available, to ensure the milk crate is firmly attached to the wall.
Optional: Paint the crates
If desired, you can paint the milk crates to match your colour palette. Use outdoor spray paint or spray paint designed for plastic to achieve the desired colour and finish.
Fill your new shelves
Once the milk crate is securely attached to the wall, you can start using your new shelf! Milk crates are versatile and can hold various items such as scarves, hats, belts, books, and more.
By following these steps, you can create functional and stylish shelves using milk crates, adding unique storage solutions to your space.
Sterilizing Plastic Petri Dishes: Autoclave Settings and Techniques
You may want to see also
Frequently asked questions
You will need a plastic crate with built-in holes, drywall anchors, washers, and two 1 1/2 inch screws. Hold the crate up to the wall and mark the wall through the holes in the crate. Drill pilot holes and then thread the washers onto the screws. Screw the washers into the anchors, pulling the crate to the wall.
If your first crate is set right, all the others will notch against it. For extra strength, zip-tie the crates together through the handles.
Yes, you can use outdoor spray paint or spray paint designed for plastic.
